ModdusPlant Protection Product ComparisonPlant Protection Product ComparisonReport inaccuraciesReport inaccuracies

FORMULATION & ACTIVE INGREDIENT: MODDUS is an emulsifiable concentrate formulation containing 250 g/l trinexapac-ethyl.

TARGETS: MODDUS is a growth regulator for crop height reduction, which can lead to lodging control and yield protection in all varieties of winter wheat and spring wheat, winter and spring barley, winter and spring oats, rye, triticale, durum wheat and ryegrass seed crops.

 

IMPORTANT: This information is approved as part of the Product Label. All instructions within this section must be carefully read in order to obtain safe and successful use of this product.

 

Avoid spray drift onto neighbouring crops. Only use on crops at risk of lodging. Do not apply if rain or frost is expected or if the crop is wet. Do not spray crops under stress or to crops suffering from waterlogging, pest attack, disease or frost.

 

 

MODDUS is an emulsifiable concentrate formulation containing 250 g/l trinexapac-ethyl It is a growth regulator for crop height reduction, which can lead to lodging control and yield protection in all varieties of winter & spring wheat, winter & spring barley, winter & spring oats, rye, triticale, durum wheat and ryegrass seed crops.

 

Apply MODDUS at 0.4 l/ha between the leaf sheath erect stage and the flag leaf fully emerged stage (GS 30-39).

 

Apply MODDUS at 0.4 l/ha between the leaf sheath erect stage and the second node detectable stage (GS 30-32).

 

Apply MODDUS at 0.4 l/ha between leaf sheath erect stage and second node detectable stage (GS 30-32).

Apply MODDUS at 0.6 l/ha between the flag leaf just visible stage and flag leaf fully emerged stage  (GS 37-39).

 

Apply MODDUS at 0.5 l/ha between the leaf sheath erect stage and the second node detectable stage (GS 30-32).

 

Apply MODDUS at 0.4 l/ha between the leaf sheath erect stage and the first node detectable stage  (GS 30-31).

 

Apply MODDUS at 0.4 l/ha between the leaf sheath erect stage and the second node detectable stage (GS 30-32).

 

Apply MODDUS at 0.8 l/ha between the leaf sheath erect stage and the first node detectable stage  (GS30-31).

 

Apply MODDUS in a recommended 200 l/ha of water. Increased penetration will be obtained with an increase in water volume but the necessity for this will be dependent on crop growth stage and habit.

Take particular care to avoid overlapping of spray  swaths

 

Make sure the sprayer is set to give an even application at the correct   volume.

Fill the spray tank with half the required volume of clean water and start agitation. Add the required amount of MODDUS and continue agitation whilst adding the rest of the water. Agitate the mixture thoroughly before use and continue agitation during  spraying.

 

Apply MODDUS in a minimum of 200 litres water per hectare. Increased water volume may assist spray penetration in larger or denser crop  canopies.