Orius 20 EWPlant Protection Product ComparisonPlant Protection Product ComparisonReport inaccuraciesReport inaccuracies

Contains 200 g/l (20% w/w) tebuconazole as an oil in water emulsion.

ORIUS 20EW is a broad-spectrum fungicide for the control of a wide range of diseases in winter and spring wheat, barley, rye, oats, oilseed rape, field beans, linseed, carrots, parsnip, horseradish, cabbages, leeks, swedes and turnips.

ORIUS 20EW is a systemic fungicide. It is rapidly absorbed into the vegetative parts of the plant and then translocated through the plant. It controls a wide range of diseases in a wide range of crops. For best disease control, apply as soon as disease appears, before spread to new growth.

Application to established diseases may be less effective.

 

Do not apply to cabbages before the beginning of heart formation.

After application to wheat some transient leaf speckling may occur, and on oats some leaf reddening or scorch may be observed. These are normally outgrown and do not affect yield.

DO NOT USE ORIUS 20EW in tank mix on oats.

CONSULT PROCESSOR BEFORE USE ON CROPS GROWN FOR PROCESSING.

 

To avoid resistance do not apply repeated applications of ORIUS 20EW alone on the same crop against the same disease. In such situation use an appropriate tank mixture or alternate with another fungicide with a different mode of action. Where resistance occurs ORIUS 20EW may not give adequate disease control.

Consult the latest advice from FRAG UK and FRAC regarding disease resistance strategies.

ORIUS 20EW contains a DMI fungicide. Resistance to some DMI fungicides has been identified in Septoria leaf blotch (Mycosphaerella graminicola) which may seriously affect the performance of some products.

For further advice on resistance management in DMI's contact your agronomist or specialist advisor, and visit the FRAG-UK website.

 

ORIUS 20EW may be used on all varieties of wheat (excluding durum wheat), barley, rye, oilseed rape, linseed, carrot, parsnip, horseradish, cabbages, swede, turnips, field beans, and leeks.

 

Apply ORIUS 20EW at a pressure of 2-3 bar (30-40 psi) and in a MEDIUM spray quality (as defined by BCPC).

 

Before spraying it is important to check all hoses, filters and nozzles, and to ensure that the sprayer is clean and correctly set to give an even application at the correct volume.

Half fill the spray tank with clean water. Add the required quantity of ORIUS 20EW and begin agitation.

Add the remainder of the water and agitate the mixture thoroughly before and during spraying. Spray immediately after mixing.