ShooterPlant Protection Product ComparisonPlant Protection Product ComparisonReport inaccuraciesReport inaccuracies

Crop Specific Information
Shooter can be used on all varieties of Winter Wheat and Winter Barley

Time of application
From pre-emergence to before third tiller stage (GS 23) of the crop.

Rate of application
Apply Shooter at 2 or 4 l/ha in 200 litres of water/ha.

Mixing and Application
Mixing
Never prepare more spray solution than is required.
Half fill the tank with clean water and start the agitation.
To ensure thorough mixing of the product, invert the container several times before opening.
Add the required quantity of Shooter to the spray tank while re-circulating.
Fill up the tank with water and continue agitation until spraying is completed.
When tank mixes are to be used, take due note of any instructions given as to the order of mixing.
Each product should be added separately to the spray tank and fully dispersed before the addition of any further product(s).
On emptying the container, rinse container thoroughly by using an integrated pressure rinsing device or manually rinsing three times.
Add washings to sprayer at time of filling and dispose of container safely.

Application
Apply as a MEDIUM spray, as defined by BCPC.
A travel speed of 6 to 8 km/h is advised for tractor-mounted and trailed sprayers.
High speeds increase the risk of uneven cover due to excessive boom whip and bounce.
The slower speed is recommended where the target is in a thick crop or weed cover, or where travel conditions are rough.