Tebusha 25 EWPlant Protection Product ComparisonPlant Protection Product ComparisonReport inaccuraciesReport inaccuracies

Crop Specific Information
Cereals
TEBUSHA 25 EW may be used on all varieties of winter and spring wheat (excluding durum), barley, rye (winter), and winter and spring oats.
Maximum individual dose: 1.0 L/ha
Maximum number of application: 1 per crop
Earliest time of application: After stem elongation (BBCH 30). Latest
time of application: End of flowering (BBCH 69).
Water Volume
Most crops 100-200 L/ha.
The higher spray volumes are recommended where the crop is dense or disease pressure / risk is high to ensure good penetration to the lower leaves and stem bases. Disease control may be compromised by reducing water volumes, where good spray coverage is difficult to achieve. Do not apply before BBCH 31 or after BBCH 69.
Diseases Controlled - Application Timing
Where disease pressure remains high, application with an alternative effective product may be required to maintain control, but only one application of TEBUSHA 25 EW may be applied per crop.

Oilseed rape
TEBUSHA 25 EW may be used on all varieties of winter or spring sown oilseed rape.
Maximum individual dose: 1.0 L product per hectare.
Maximum number of application: 1 per crop.
Earliest time of application: Beginning of side shoot development (BBCH 21).
Latest time of application: End of flowering (BBCH 69).
Water Volume
TEBUSHA 25 EW should be applied in 100-400 L/ha of water, using the higher volume in dense crops.

Field Beans
Maximum individual dose: 1.0 L per hectare
Maximum number of applications: 1 per crop
Earliest time of application: Do not apply before BBCH 41
Latest time of application: Not less than 35 days before harvest.
Water Volume
TEBUSHA 25 EW should be applied in 200-600 L/ha of water, using the higher volume in dense crops.
Diseases Controlled - Application Timing
Chocolate Spot and Bean Rust control:
Apply TEBUSHA 25 EW at first signs of disease from the early flower stage.

Linseed
Maximum individual dose: 1.0 L per hectare.
Maximum number of applications: 1 per crop.
Earliest time of application: Beginning of side shoot development (BBCH 21).
Latest time of application: Not less than 35 days before harvest.
Water Volume
TEBUSHA 25 EW should be applied in 100-400 L/ha of water, using the higher volume in densecrops.

Mixing and Spraying
Ensure sprayers are clean and in good working order. Thoroughly shake the pack before use.
Half fill the spray tank with clean water and begin agitation. Add the required quantity of TEBUSHA 25 EW. Add the remainder of the water. Continue agitation during mixing and spraying. Apply as a
MEDIUM quality spray (BCPC definition) at a pressure of 2-3 bars.
Spray immediately after mixing. Where tank mixtures are used
TEBUSHA 25 EW should be added to the spray tank last, after first dispersing the other product(s).
For best results ensure good coverage of the crop. Use the recommended higher water volumes where crops are dense. See
“Crop Specific Information” for more information.
Empty the spraying equipment completely on the field just sprayed.
Remove all filters and nozzles, scrub clean and rinse them with clean water. Put 10% clean water into the tank to cover the agitator.
Operate a tank flushing system if fitted. Circulate water through thepump and controls for at least one minute. Drain sprayer, collect washings. Repeat procedure once more. Pump last washing water out through boom feed, hoses and pipes. Collect washings. Clean off the outside of the sprayer using minimum water volumes. Collect washings. Replace cleaned nozzles and filters. Collect and put all washings back into the tank and spray out on the field headland, or otherwise safely dispose of them. Ensure the sprayer systems are completely drained before storage. Store Plant Protection Equipment in a properly designated store.