Audit 4:1

Manufacturer
Arysta LifeScience
Category
Herbicides
Registered until
N/A
Registration number
66330-419
Active materials
Links

USE INFORMATION
This product can be used in a tank mix with other suitable registered herbicides to provide selective postemergence control of certain broadleaf weeds in wheat (including durum), barley, triticale, post-harvest burndown, pre-plant burndown and fallow. This product is a water dispersible granule to be mixed in water or other recommended carrier and applied as a uniform broadcast spray. It is noncorrosive, nonflammable, nonvolatile and does not freeze.

BIOLOGICAL ACTIVITY AND ENVIRONMENTAL CONDITIONS
Best results are obtained when this product is applied to young, actively growing weeds. The specified use rate .will depend on weed spectrum and size of weed at time of application. The degree of control and duration of effect are dependent on rate used, sensitivity and size of target weed and environmental conditions at the time of and following application. This product stops growth of susceptible weeds rapidly. However, typical symptoms of dying weeds (discoloration) may not be noticeable for 1.to 3 weeks after application (2 to 5 weeks for wild garlic, when present) depending on the environmental conditions and weed susceptibility.
Warm, moist conditions following treatment promote the activity of this product, while cold, dry conditions delay the activity. Weeds hardened-off by cold weather or drought stress will be less susceptible.
A vigorous growing crop will aid weed control by shading and providing competition for weeds. However, a dense crop canopy at time of application can intercept spray and result in reduced weed control. Weeds may not be adequately controlled in areas of thin crop stand or seeding skips.
Applications made to weeds that are in the cotyledon stage, larger than the size indicated, or to weeds under stress may result in unsatisfactory.control.
This product may injure crops that are stressed from adverse environmental conditions (such as extreme temperatures or moisture), abnormal soil conditions, or cultural practices. In addition, different varieties of the crop may have differing levels of sensitivity to treatment with   this product under otherwise normal conditions.
Treatment of sensitive crop varieties may injure crops. To reduce the potential of crop injury, tank mix this product with 2,4-D (ester formulations perform best - see TANK MIXTURES section of this label) and apply after the crop is in the tillering stage of growth. Weed control may be reduced if rainfall or snowfall occurs soon after application. Several hours of dry weather are needed to allow this product to be sufficiently absorbed by weed foliage.

DIRECTIONS FOR USE
It is a violation of Federal law to use this product in a manner inconsistent with its labeling, Do not apply this product in a way that will contact workers or other persons, either directly or through drift. Only protected handlers may be in the area during application. For any requirements specific to your State or Tribe, consult the agency responsible for pesticide regulation.

AGRICULTURAL USE REQUIREMENTS
Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR part 170. This Standard contains requirements for the protection of agricultural workers on farms, forests, nurseries, and greenhouses, and handlers of agricultural pesticides. It contains requirements for training, decontamination, notification; and emergency assistance. It also contains specific instructions and exceptions pertaining to the statements on this label about personal protective equipment (PPE) and restricted-entry interval. The requirements in this box only apply to uses of this product that are covered by the Worker Protection Standard. Do not enter or allow worker entry into treated areas during the restricted entry interval (REI) of 12 hours.
PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and that involves contact with anything that has been treated, such as plants, soil, or water is:
• Coveralls
• Chemical-resistant gloves made of any waterproof material
• Shoes plus socks :
This product must be used only in accordance with instructions on this label or in separately published Arysta LifeScience North America, LLC instructions.
Arysta LifeScience North America, LLC will not be responsible for losses or damages resulting from the use of this product in any manner not in accordance with instructions on this label. This product is registered for use on wheat, barley, triticale, post-harvest burndown, pre-plant burndown and fallow in most states. Check with your state extension service or Department of Agriculture before use, to be certain this product is registered in your state.

APPLICATION TIMING
WHEAT (INCLUDING DURUM), BARLEY, AND TRITICALE
Make applications after the crop is in the 2-leaf stage, but before the flag leaf is visible. Do not harvest within 45 days of the last application.

PRE-PLANT BURNDOWN
For burndown of emerged weeds, broadcast applications of this product may be applied up through planting, but before wheat (including durum), barley or triticale plants emerge. Apply this product as a burndown treatment to sugarbeets, winter rape, and canola fields at least 60 days prior to planting.
Apply this product as a burndown treatment before planting any other crop (such as soybeans and field corn, cotton, rice, or grain sorghum) at least 45 days prior to planting. (Seethe CROP ROTATION section of this label for additional information.)

POST HARVEST
This product may be used as a burndown treatment to crop stubble when the majority of weeds have emerged and are actively growing. (See the CROP ROTATION section of this label for additional information.)

FALLOW
Apply this product in the spring or fall when the majority of weeds have emerged and are activel growing. Generally, such appiications are made in the spring or fall when most cereal applications are made. (See the CROP ROTATION section of this label for additional information.)

USE RATES
Unless otherwise instructed by Arysta LifeScierice North America, LLC, do not use less than 0.6 ounce of this product per acre. .

WHEAT, BARLEY AND TRITICALE
Apply 0.6 to 1.0 ounce of this product per acre in a tank mix with other suitable registered herbicides. Refer to the APPLICATION TIMING, TANK MIXTURES, USE INFORMATION, and WEEDS CONTROLLED sections of this label for additional information. Sequential treatments of this product may be made provided the total amount of this product applied to the crop does not exceed 1.8 ounces per acre.

PRE-PLANT BURNDOWN
Apply 0.6 to 1.0 ounce of this product per acre as a burndown treatment prior to planting any crop; or shortly after planting, but prior to emergence of, wheat (including durum), barley, or triticale. (See the APPLICATION TIMING section of this label for restrictions on planting intervals.)
This product should be applied in combination with other suitable registered preplant burndown herbicides. (See the TANK MIXTURES section of this label for additional information.)
Sequential treatments of this product may also be made provided the total amount of this product applied during one fallow/preplant season does not exceed 1.8 ounces per acre.

POST HARVEST AND FALLOW
Apply 0.6 to 1.0 ounce of this product per acre as a postemergence fallow treatment, in combination with other suitable registered fallow herbicides. (See the TANK MIXTURES section of this label for additional information.)
Sequential treatments of this product may be made provided the total amount of this product applied to the crop does not exceed 1.8 ounces per acre.

SPRAY ADJUVANTS
Include a spray adjuvant with applications of this product. An ammonium nitrogen fertilizer may also be used. Do not use low rates of liquid nitrogen fertilizer solution as a substitute for a surfactant. Always use a surfactant, unless otherwise recommended. Antifoaming agents may be used if needed. Consult your Ag dealer or applicator, local Arysta LifeScience North America, LLC fact sheets and technical bulletins prior to using an adjuvant system. Select adjuvants that are authorized for use with all products in this product tank mix. Products must contain only EPA-exempt ingredients {40 CFR 1001).

NONIONIC SURFACTANT (NIS)
• Apply 0.25 to 0.50% v/v (2 to 4 pints per 100 gal of spray solution).
• Surfactant products.must contain at least 60% nonionic surfactant with a hydrophilic/lipophilic balance (HLB) greater than 12. (See the TANK MIXTURES section of this label for additional information.)

CROP OIL CONCENTRATE (COC) - PETROLEUM OR MODIFIED SEED OIL (MSO)
• Apply at least 1% v/v (1 gal per 100 gal spray solution), or 2% under arid conditions. MSO adjuvants may be used at 0.5% v/v if specified on local Arysta LifeScience North America, LLC product literature or service policies.
• Oil adjuvants must contain at least 80 % high-quality, petroleum (mineral) or modified vegetable-seed oil with at least 15% surfactant emulsifiers.

SPECIAL ADJUVANT TYPES
• Combination adjuvant products may be used at doses that provide the required amount of NIS, COC, MSO and/or ammonium nitrogen fertilizer. Consult product literature for use rates and restrictions.
• In addition to the adjuvants specified above, other adjuvant types may be used if they provide the same functionality and have been evaluated and approved by Arysta LifeScience North America, LLC product management. Consult separate Arysta LifeScience North America, LLC technical bulletins for detailed information before using adjuvant types not specified on this label.

AMMONIUM NITROGEN FERTILIZER
• Use 2 qt per acre of a high-quality urea ammonium nitrate (UAN) with a surfactant, such as 28%N or 32%N, or 2 Ib per acre of a spray-grade ammonium sulfate (AMS), with a surfactant. Use 4 qt per acre UAN or 4 Ib per acre AMS under arid conditions.

Registered for cultures
Winter wheat
Spring wheat
Buckwheat
Spring barley
Winter barley
Winter triticale
Spring triticale