ILeVOPlant Protection Product ComparisonPlant Protection Product ComparisonReport inaccuraciesReport inaccuracies

EPA # 0000264-01167-AA-0000000
States Registered: AL AR AZ CO CT DE FL GA HI IA IL IN KS KY LA MD MI MN MO MS NC ND NE NJ NM OH OK OR PA SC SD TN TX VA WI WV

DIRECTIONS FOR USE
STOP - READ THE ENTIRE LABEL BEFORE USE
It is a violation of Federal law to use this product in a manner inconsistent with its labeling.

PRODUCT INFORMATION
ILeVO is a seed treatment labeled for the control or suppression of certain plant pathogenic fungi and nematodes. 

LABELED USES
Soybean

RESISTANCE  MANAGEMENT
The active ingredient in ILeVO belongs to the pyridinyl-ethyl-benzamides (Group 7). Because resistance development cannot be predicted, the use of this product should conform to resistance management strategies established for the crop and use area. Such strategies may include rotating and/or tank mixing with products having different modes of action; or limiting the total number of applications per season. Use labeled rates. Contact your local extension specialist, certified crop advisor, and/or manufacturer for fungicide/insecticide resistance management and/or integrated pest management recommendations for specific crops and pest populations. Bayer CropScience encourages responsible product stewardship to ensure effective long-term control of pests on this label.

ROTATIONAL CROP RESTRICTIONS
The following crops can be replanted immediately following the last application of Fluopyram:
Artichoke, globe; Berry, low growing, except cranberry, subgroup 13-07G; Brassica, Head and Stem, subgroup 5A;  Brassica Leafy Greens, subgroup 5B; Bushberry subgroup 13-07B; Caneberry subgroup 13-07A; Carrot;  Cherry subgroup 12-12A; Corn, field, grain; Corn, pop, grain; Corn, sweet kernel plus cob with husks removed; Cottonseed subgroup 20C; Dill seed;  Fruit, citrus, group 10-10; Fruit, pome, group 11-10;  Fruit, small vine climbing, except fuzzy kiwifruit, subgroup 13-07F; Ginseng; Grain, cereal, group 15 (except corn) which include: barley, buckwheat, millet (pearl and proso), oats, rice; rye, sorghum, teosinte, triticale, and wheat; Herb subgroup 19A; Hop, dried cones; Leafy greens subgroup 4A;  Leaf petioles subgroup 4B (except watercress); Legume Vegetables (except cowpea and dried peas); Melon subgroup 9A;  Nut, tree, group 14-12; Onion, bulb, subgroup 3-07A;  Onion, green, subgroup 3-07B; Peach subgroup 12-12B; Plum subgroup 12-12C; Peanut; Pepper/eggplant subgroup 8-10B; Rapeseed subgroup 20A; Soybean; Squash/Cucumber subgroup 9B; Sugarbeet, roots; Sunflower subgroup 20B; Tomato subgroup 8-10A;  Vegetable, root, except sugarbeet, subgroup 1B; Vegetable, tuberous and corm, subgroup 1C. Alfalfa can be planted after 14 days and sugarcane can be planted after 14 days in Region 3. Do not rotate to crops other than those listed above.  Do not rotate to crops other than those listed above. 

USE INFORMATION
ILeVO is a seed treatment that when applied to seed, aids in protecting the seed and seedling against certain early season plant pathogenic fungi and nematodes that attack the root system. In areas of high nematode infestation additional control measures may be warranted. The use of ILeVO can suppress early season infection by Fusarium virguliforme, the causal agent of Sudden Death Syndrome. 

COMPATIBILITY
It is essential that before using ILeVO seed treatment in any tank mixture the compatibility of the mixture be established. Add ILeVO at the labeled rate to a clean quart jar containing approximately one-half the amount of water intended for a final slurry application rate. Next, follow with all other tank mix components that will be used in the total slurry application. Add last the remaining balance of water. The total amount of volume is determined by the seed size and how much is necessary to ensure complete and uniform coverage and distribution on the seed, as well as the type of commercial seed treating application equipment that will be used. DO NOT USE MIXTURES THAT CURDLE, PRECIPITATE, OR GEL. USE TANK MIXTURES IMMEDIATELY AFTER MIXING WITH ADEQUATE AGITATION. MIXING INSTRUCTIONS When applied with seed treatment application equipment designed to treat seed utilizing a treatment slurry mixture, add approximately 1/2 to 2/3 of the required water to the treatment slurry tank followed by the accompanying seed treatment products and ILeVO.  The order of product addition is dependent on the accompanying seed treatment products and application equipment used. Allow each slurry component to disperse completely prior to the next addition until a uniform suspension is obtained. After all slurry components have been added and dispersed completely add the remaining 1/2 to 1/3 of required water for proper slurry volume and mix until uniform. Do not store mixed slurries for greater than 72 hours. Maintain adequate agitation until treatment slurry is applied. For additional instructions for use, slurry component mixing order, and other application suggestions contact your Bayer CropScience representative. APPLICATION RATES Can be used in combination with other registered Bayer CropScience seed treatment fungicides and insecticides.  Pre-test for compatibility with other seed treatment products.

SEED BAG TAG
The Federal Seed Act requires that the container of seed treated with ILeVO must be labeled with the following statements: This seed has been treated with ILeVO, which contains 48.4% of Fluopyram.
Do not use treated seed for food, feed, or oil purposes. Excess treated seed may be used for ethanol production only if (1) by-products are not used for livestock feed and (2) no measurable residues of pesticide remain in ethanol by-products that are used in agronomic practice.
Store treated seeds away from food and feedstuffs.
Do not allow children, pets, or livestock to have access to treated seed.
Wear long-sleeved shirt, long pants and chemical-resistant gloves when handling treated seed.
Treated seeds exposed on soil surface may be hazardous to wildlife. Cover or collect treated seeds spilled during loading.
Dispose of all excess treated seed. Leftover treated seed may be buried away from water sources in accordance with local requirements.
Do not contaminate water bodies when disposing of planting equipment wash waters.
Treated seed must be adequately covered with soil at planting.
Dispose of seed packaging or containers in accordance with local requirements.  Do not use empty seed bags for any other purpose.
To reduce seed dust which can drift onto blooming crops or weeds, ensure that planting equipment is functioning properly in accordance with manufacturer’s recommendations.  Surplus seed or empty seed containers should be stored or disposed according to local federal regulations.
Do not graze or feed soybean forage and hay to livestock after treating with ILeVO.  
Treated at manufacturer’s recommended rate.

STORAGE AND DISPOSAL
Do not contaminate water, food or feed by storage, disposal or cleaning of equipment.

PESTICIDE STORAGE
Store in original container away from feed and food. Store in cool, dry area. Do not store in direct sunlight. Do not allow prolonged storage in temperatures that exceed 105°F (40°C) or in temperatures that fall below 14°F (-10°C).

IMPORTANT: READ BEFORE USE
Read the entire Directions for Use, Conditions, Disclaimer of Warranties and Limitations of Liability before using this product. If terms are not acceptable, return the unopened product container at once.
By using this product, user or buyer accepts the following Conditions, Disclaimer of Warranties and Limitations of Liability.
Treatment of highly mechanically damaged seed, or seed of known low vigor and poor quality, may result in reduced germination and/or reduction of seed and seedling vigor. Treat and conduct germination tests on a small portion of seed before committing the total seed lot to a selected chemical treatment. Due to seed quality conditions beyond the control of Bayer CropScience, no claims are made to guarantee germination of carry-over seed.
CONDITIONS: The directions for use of this product are believed to be adequate and must be followed carefully. However, it is impossible to eliminate all risks associated with the use of this product. Crop injury, ineffectiveness or other unintended consequences may result because of such factors as weather conditions, presence of other materials, or the manner of use or application, all of which are beyond the control of Bayer CropScience. All such risks shall be assumed by the user or buyer.

Canceled