Mocap ECPlant Protection Product ComparisonPlant Protection Product ComparisonReport inaccuraciesReport inaccuracies

RESTRICTED USE PESTICIDE
DUE TO ACUTE ORAL, ACUTE DERMAL, ACUTE INHALATION, PRIMAL DERMAL AND PRIMAL EYE TOXIGTY For retail sale to and use only by Certified Applicators or persons under the direct supervision of a Certified Applicator, and only for those uses covered by the Certified Applicator's certification.

DIRECTIONS FOR USE
It is a violation of Federal Law to use this product in a manner inconsistent with its labeling. Read entire label before using this product. For any requirements specific to your State or Tribe, consult the agency responsible for pesticide regulation.

RESTRICTIONS
• Do not apply this product in a way that will contact workers or other persons, either directly or through drift. Only protected handlers may be in the area during application.
• Do not allow this product to drift.
• Not for Residential use.
• Do not store or use in or around home or residence.
• Do not apply by air.
• Do not apply more than one application per crop season.
• Application must be incorporated into the soil.
• This product is not registered in Nassau & Suffolk Counties of New York State. State law prohibits distribution, sale, or use of the product in these counties.

AGRICULTURAL USE REQUIREMENTS
Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR part 170. This standard contains requirements for the protection of agricultural workers on farms, forests, nurseries, and greenhouses, and handlers of agricultural pesticides. It contains requirements for training, decontamination, notification, and emergency assistance. It also contains specific instructions and exceptions pertaining to the statements on this label about personal protective equipment (PPE), notification to workers, and restricted-entry intervals. The requirements in this box only apply to uses of this product that are covered by the Worker Protection Standard.
Do not enter or allow workers to enter treated areas during the restricted entry interval (REI) of 48 hours. The 48 hour REI is increased to 72 hours in outdoor areas where average rainfall is less than 25 inches a year.
EXCEPTION: If the product is soil injected or soil incorporated, the Worker Protection Standard, under certain circumstances, allows workers to enter the treated area if there will be no contact with anything that has been treated. PPE required for early re-entry to treated areas that is permitted under the Worker Protection Standard and that involves contact with anything that has been treated, such as plants, soil, or water, is:
• coveralls over long-sleeved shirt and long pants,
• chemical-resistant gloves,
• chemical-resistant footwear plus socks, and
• protective eyewear.
Notify workers of the application by warning them orally and by posting warning signs at entrances to treated areas.

SPRAY ZONE APPLICATION RESTRICTIONS
Do not apply this product within 140 feet of inland freshwater habitats. Along the Atlantic seaboard, do not apply within 800 feet of brackish water habitats. Under no circumstances is this product to be applied within 140 feet of people or these surface water bodies. Do not allow spray to drift from the application site and contact people, structures people occupy at any time and the associated property, parks and recreation areas, nontarget crops, aquatic and wetland areas, woodlands, pastures, rangelands, or animals. For ground boom applications, apply with nozzle height no more than 4 feet above the ground and only when wind speed is 10 mph or less at the application site as measured by an anemometer. Use medium or coarser spray as described according to ASAE 572
•definition for standard nozzles or VMD for spinning atomizer nozzles. The applicator also must use all other measures necessary to control drift.

APPLICATION RESTRICTIONS
• For application only by motorized ground boom equipment and through irrigation systems if specified in crop-specific use directions.
Do not apply with liquid backpack sprayers, low-pressure handwand liquid equipment, sprinkler cans or hand-held measuring containers, or by hand-dipping of seedlings.
• For use on ornamentals: only preplan! broadcast application to soil for field nursery stock, which may only be mechanically transplanted into the treated area, and not until 72 hours after treatment.
• This product is to be soil incorporated (except chemigation applications using SDI) to a depth of at least 2 to 4 inches, during or immediately following application by mechanical means, including by rotary tiller, rotary hoe, springtooth harrow, or by double-discing.
• Calibrate and adjust application equipment to insure proper rate and accurate placement. Clean application equipment thoroughly after use. For any leftover material, see instruction for "Storage and Disposal" on this label.
• Apply this product only as specified on this label.
• Do not apply in Long Island, New York.

ROTATIONAL CROP RESTRICTIONS
• Do not plant leafy vegetables within 30 days of last application.
• Do not plant small grains within 8 months of last application.
• Except for potatoes and sweet potatoes, do not rotate to any root or tuber crops within 12 months of last application.

PLANT RESPONSE PRECAUTIONS
• To avoid possible injury to cabbage, do not use as a seed furrow treatment or allow spray to contact the seed.

MIXING, LOADING, AND HANDLING INSTRUCTIONS
• MOCAP EC Nematicide-lnsecticide spray mixture may affect some plastic materials after prolonged use. Inspect spray tubing hoses and gaskets frequently, particularly black-colored materials. Replace any material which is softened or swollen. Polyethylene, polypropylene, nylon, and teflon materials are satisfactory. Polyvinyl chloride (PVC) materials are not satisfactory.
• Add the specified amount of MOCAP EC Nematicide-lnsecticide to the water in the spray tank and mix well. Agitate frequently during use.
• If MOCAP EC Nematicide-lnsecticide is to be tank mixed with liquid fertilizers, test for physical compatibility prior to mixing. To test for compatibility, use a small container and mix a small amount (0.5 to 1 qt.) of spray, combining all ingredients in the same ratio as the anticipated use. If any indications of physical incompatibility develop, do not use this mixture for spraying. Indications of incompatibility usually will appear within 5-15 minutes after mixing.