Omite-6EPlant Protection Product ComparisonPlant Protection Product ComparisonReport inaccuraciesReport inaccuracies

DIRECTIONS FOR USE
RESTRICTED USE PESTICIDE
It is a violation of Federal law to use this product in a manner inconsistent with its labeling.
Do not apply this product in a way that will contact workers or other persons, either directly or through drift. Only protected handlers may be in the area during application. For any requirements specifi c to your State or Tribe, consult the agency responsible for pesticide regulation.

GENERAL INSTRUCTIONS
OMITE-6E is a liquid emulsifi able concentrate for preparing sprays to control mites. OMITE-6E is not systemic in action, therefore complete coverage of both upper and lower leaf surfaces and of fruit is necessary for effective control. OMITE6E can be used in concentrate sprays as directed by this label.
OMITE-6E performance is best when day temperatures average above 70°F.

MIXING INSTRUCTIONS
After spray tank is three-quarters full of water, add recommended dosage (from table) of OMITE-6E to the spray tank.
Fill tank, agitate and spray thoroughly to cover foliage and fruit for best results.

COMPATIBILITIES
OMITE-6E is compatible with most pesticides. Observe all cautions and limitations on labeling of all products used in mixtures.
However, due to variations in water quality, e.g. hardness and pH, it is required that users conduct small scale trials under local conditions to ensure compatibility prior to large scale use.
NOTE:
A. Leaf injury may occur if the following conditions are not
observed.
1. Do not apply OMITE-6E with Diazinon WP if air temperatures are expected to exceed 95°F. the day of spraying apples or hops.
2. OMITE-6E is not compatible with petroleum based foliar spray oils. (Further information available from supplier.)
3. Do not use penetrating surfactants. Under certain conditions a non-penetrating surfactant can be added. Rely on your previous use experience or consult your local sufactant supplier for specifi c recommendations. B. OMITE-6E is not compatible with alkaline materials such as lime, lime sulfur or Bordeaux. The effectiveness of OMITE will be reduced.
Contact your supplier or the company representative for additional information on compatibility