Regent 500TS

Manufacturer
BASF
Category
Insecticides
Registered until
N/A
Registration number
7969-235
Active materials
Links

Regent SOOTS may be applied as a water-based slurry with other registered com seed treatment materials. Potential tank mix partners should be tested for physical compatibility with Regent SOOTS and added dyes or polymers before mixing in a large tank for seed treatment. Regent SOOTS should be applied at the rate of 1 .5 to 3 fl oz per 100 Ib seed (0.05 to 0.10 Ib ai per 100 Ib seed). Regent SOOTS should be applied with a seed treatment machine which can provide an accurate application of chemicals to seeds. Regent SOOTS can be applied with a polymer to improve evenness and adherence and reduce dust. Follow manufacturer's directions for quantity of polymer to be used. Use 10 - 24 fl oz of slurry per 100 Ib seed, or follow machine and polymer manufacturer's recommendations for slurry volumes for corn. Use sufficient EPA approved seed dye or colored polymer to achieve a distinctive unnatural color on the seed.
To apply Regent500TS using a'mixing tank, place 3/4 of the water and all of the polymer or dye needed into the mixing tank and begin agitation. Measure the amount of Regent SOOTS needed and add to the tank. Use the remaining water to thoroughly rinse the measuring container. Add rinsates to the tank. Maintain agitation during application.

Registered for cultures
Corn