Rovral

Manufacturer
FMC
Category
Fungicides
Registered until
N/A
Registration number
279-9563
Active materials
Links

GENERAL INSTRUCTIONS AND INFORMATION
HOW TO USE ROVRAL  BRAND FUNGICIDE
Partially fill the spray tank with clean water. Measure the required amount of ROVRAL ® Brand Fungicide and pre-mix with a small volume of water, add this to the tank. Agitate to ensure thorough mixing while filling tank with remaining water. Maintain agitation during application and apply with properly calibrated application equipment. Do not allow spray mixture to stand overnight or for prolonged periods, as some chemica! breakdown may occur, particularly in water with a high pH. The spray solution should be buffered to a pH of 5.0 - 7.0. A high quality, non ionic spreader can be used as a spray tank additive for every application with the exception of infurrow sprays. ROVRAL  brand Fungicide should be added to the tank before the addition of any adjuvant. Consult the adjuvant label or manufacturer for crop tolerance and safety information when used with ROVRAL ® brand Fungicide. Mixing with very acidic products may result in preCipitation of ROVRAL  brand Fungicide.

HOW TO APPLY ROVRAL BRAND FUNGICIDE IN-FURROW FOR COTTON
Use sprayer equipment calibrated to deliver the registered dose rate of product. Spray nozzles should be configured on the planter to
apply the produCt into the open seed furrow. Spray nozzles are most idea//y located to place product after the seed is dropped and
before devices which cover the open seed furrow.

Registered for cultures
Cotton