SliderPlant Protection Product ComparisonPlant Protection Product ComparisonReport inaccuraciesReport inaccuracies

DIRECTIONS FOR USE
It is a violation of federal law to use this product in a manner inconsistent with its labeling. DO NOT apply this product in a way that will contact workers or other persons, either directly or through drift. Only protected handlers may be in the area during application. For any requirements specific to your state or tribe, consult the agency responsible for pesticide regulation. Unless otherwise directed in supplemental labeling, all applicable directions, restrictions, precautions and CONDITIONS OF SALE AND LIMITATION OF WARRANTY AND LIABILITY are to be followed. This labeling must be in the user's possession during application.

Mode of Action
This product is a root and shoot growth inhibitor that controls susceptible germinating seedlings before or soon after they emerge from the soil.

Cleaning Spray Equipment
Clean application equipment thoroughly by using a strong detergent or commercial sprayer cleaner according to the manufacturer's directions and then triple rinsing the equipment before and after applying this product.

APPLICATION INSTRUCTIONS
This product will provide most effective weed control when applied by ground or aerial equipment, and subsequently incorporated into soil by rainfall, sprinkler irrigation, or mechanical tillage prior to weed seedling emergence from soil. This product can also be applied through herbigation. This product is labeled for preplant incorporated, preplant surface, preemergence, early postemergence or layby (corn) treatment. This product may be applied using either water or sprayable fluid fertilizer as the spray carrier. Additionally, this product may be impregnated on and applied with dry bulk fertilizer. Sprayable fluid fertilizer as a carrier is not recommended for use after crop emergence. Refer to Additives for more information.

Application Rate
Use rates for this product when used alone, in tank mix, or sequential applications are given in Table 2. Refer to Crop-specific Information for additional rate information. Use rates of this product may vary by soil texture and organic matter. Soil texture groupings used in this label are coarse (sand, loamy sand, sandy loam), medium (silt, silt loam, loam, sandy clay loam), and fine (sandy clay, silty clay, silty clay loam, clay loam, and clay).
DO NOT apply to sand-textured soil with less than 3% organic matter (as determined by soil tests, if not known) where depth to groundwater is 30 feet or less. When use rates are expressed in ranges, use the lower rates for more coarsely textured soils lower in organic matter and use the higher rates for more finely textured soils that are high in organic matter.
Preplan! Surface Applications. For use in minimum tillage or no-tillage production systems, apply this product alone or in tank mixes up to 45 days before planting. When making early preplant applications (15 to 45 days prior to planting), use the highest rate specified for the specific soil type. Early preplant applications are not for use on coarse-textured soils or in areas where average annual rainfall (or rainfall + irrigation) typically exceeds 40 inches. Early preplant applications may be applied as part of a split application program where the second application is made after planting (use 2/3 of this product's rate early followed by 1/3 of rate after planting). A split application is recommended when the initial application is made more than 30 days prior to planting. Tank mixes with postemergence herbicides registered for use on specific crop such as glyphosate, or Touchdown (glyphosate), or Gramoxone Inteon (paraquat) must be used when weeds are present at the time of application.
Preplant Incorporated Applications. Apply this product and incorporate into the upper (1 to 2 inches) soil surface up to 2 weeks before planting. Use a harrow, rolling cultivator, finishing disk, or other implement capable of giving uniform shallow incorporation. Avoid deeper incorporation or reduced weed control or crop injury may result.
Preemergence Surface Applications. Broadcast treatment uniformly to the soil surface after planting and before crop emergence. Rainfall, sprinkler irrigation, or shallow mechanical incorporation after application is vrequired to move this product into the upper soil surface where weed seeds germinate. If adequate rainfall or irrigation does not occur and weed seedling emergence begins, a shallow cultivation or rotary hoeing will improve performance.
Early Postemergence Applications. This product must be applied prior to weed seedling emergence or in a tank mix with products registered for use on the specific crop on this label that control the emerged weeds. Refer to Crop-specific Information for specific postemergence applications by crop.

Layby Application. Use this product in field corn, seed corn and popcorn. See Crop-specific Information - Corn for more details on layby application.