SOL OIL 97Plant Protection Product ComparisonPlant Protection Product ComparisonReport inaccuraciesReport inaccuracies

DIRECTIONS FOR USE
It is a violation of Federal law to use this product in a manner inconsistent with its labeling.
Disclaimer: Always refer to the label on the product before using Helena or any other product. Do not apply this product in a way that will contact workers or other persons, either directly or through drift. Only protected handlers may be in the area during application. For any requirements specific to your State or Tribe, consult the agency responsible for pesticide regulation.

USE RESTRICTIONS AND PRECAUTIONS
Do not apply this product in undiluted form. Do not use this material if it does not mix with water.
Do not apply oil sprays when trees are wilting or near wilting. Allow a period of 3 weeks or more between application of sulfur or lime and application of an oil spray.
Do not apply oil sprays during periods of excessively high temperature (over 90°F). Do not apply this product when weather reports indicate or predict freezing temperatures.
Oil sprays applied after October 1 increase the susceptibility of trees to cold-related injury and may reduce the crop in the following year.
Oil sprays applied to fruit-bearing trees during August and September may seriously reduce the solids content of the juice and retard coloring. Oil sprays applied when fruit is between ¾ inch and 1-1/2 in diameter may cause oil blotch.

MIXING INSTRUCTIONS
1. Add enough water to the mixing tank for proper agitation.
2. Add micronutrients and other desired pesticides. If dry pesticide products are used, mix the materials with water thoroughly so that they are completely dispersed in the mixing tank. DO NOT add SOL-OIL 97 before a uniform mixture of pesticide and water is obtained.
3. Maintain agitation of the mix until the spray is applied. Flush any spray mix remaining in hoses back into the tank if the solution stands for more than 20 minutes.
4. Ensure that spray equipment is thoroughly clean so that residues from other applications do not remain. For scalicides to be effective, complete coverage is essential, necessitating a thorough inside and outside tree application.