SonataPlant Protection Product ComparisonPlant Protection Product ComparisonReport inaccuraciesReport inaccuracies

DIRECTIONS FOR USE
It is a violation of Federal law to use this product in a manner inconsistent with its labeling.

BASIC USE INFORMATION
Sonata is a broad spectrum, preventative product for the control or suppression of many important plant diseases. Apply Sonata as a foliar spray alone, in alternating spray programs or in tank mixes with other registered crop protection products. Apply Sonata as a soil drench alone or in tank mixes with other registered crop protection products. When conditions are conducive to heavy disease pressure, use Sonata in a rotational program with other registered fungicides. Apply Sonata with spray equipment commonly used for making ground or aerial applications and sprinkler/irrigation systems commonly used for chemigation. Heavy rainfall or irrigation shortly after application may require retreatment. Sonata can be used for organic production.

PREHARVEST INTERVAL
Sonata can be applied up to and including the day of harvest.

APPLICATION  INSTRUCTIONS
GENERAL: Avoiding spray drift at the application site is the responsibility of the applicator. The interaction of many equipment- and weather-related factors determines the potential for spray drift. The applicator and the grower/treatment coordinator are responsible for considering all of these factors when making decisions. Where states have more stringent regulations, they should be observed.

MIXING INSTRUCTIONS
MIXING: Sonata must be diluted with water. Partially fill the spray tank with clean water and begin agitation. Add the required amount of Sonata needed for the area treated to the tank. Finish filling the tank to the necessary volume to obtain the proper spray concentration. It is critical to maintain agitation continuously during mixing and application to assure a uniform suspension. Do not allow spray mixture to stand overnight or for prolonged periods. Maintain a spray solution pH between 4.5 and 8.5.

COMPATIBILITY: Do not combine Sonata in the spray tank with pesticides, adjuvants, surfactants or fertilizers if there has been no previous experience or use of the combination to show it is physically compatible, effective and non-injurious under conditions of use.
Sonata is compatible with many commonly used pesticides, fertilizers, adjuvants and surfactants but has not been fully evaluated with all of these. To ensure compatibility of tank-mix combinations evaluate them prior to use, as follows: Using a suitable container, add proportional amounts of products to water. Add wettable powders first, followed by water dispersible granules, then liquid flowables, and lastly, emulsifiable concentrates. Mix thoroughly and let stand for at least five minutes. If the combination stays mixed or can be remixed, it is physically compatible. Before using this product on a large number of plants, test the combination on a small portion of the crop to be treated to ensure that a phytotoxic response will not occur as a result of application, using the product in accordance with all label use directions.
ADDITIVES: Sonata is compatible with a wide range of additives. Since the product is primarily a protectant, thorough coverage of all above-ground plant parts is required for effective product performance. To improve plant surface coverage, add a nonphytotoxic adjuvant to spray tank.

CHEMIGATION DIRECTIONS FOR USE
GENERAL  REQUIREMENTS:
1) Apply this product through sprinkler (including center pivot, lateral move, end tow, side (wheel) roll, traveler, solid set or hand move) or drip type irrigation systems. Do not apply this product through any other type of irrigation system.
2) Crop injury or lack of effectiveness can result from non-uniform distribution of treated water.
3) Ensure that the irrigation system used is properly calibrated and if you have questions, call the State Extension Service specialists, the equipment manufacturer or other experts.
4) Do not connect an irrigation system (including greenhouse systems) used for pesticide application to a public water system unless the pesticide label-prescribed safety devices for public water systems are in place.
5) A person knowledgeable of the chemigation system and responsible for its operation, or under the supervision of the responsible person, shall shut the system down and make any necessary adjustments should the need arise.

STORAGE AND DISPOSAL    
Do not contaminate water, food, or feed by storage and disposal.
STORAGE: Store in a dry area inaccessible to children. Store in original containers only. Keep container closed when not in use.

CONDITIONS FOR SALE AND WARRANTY IMPORTANT: READ BEFORE USE
Read the entire Directions for Use, Conditions, Disclaimer of Warranties and Limitations of Liability before using this product. If terms are not acceptable, return the unopened product at once for a refund of the purchase price. By using this product, user or buyer accepts the following Conditions, Disclaimer of Warranties, and Limitations of Liability . These terms may only be modified by a written document signed by a duly authorized representative of Bayer CropScience LP.
CONDITIONS: The directions for use of this product are believed to be adequate and must be followed carefully. However, it is impossible to eliminate all risks associated with the use of this product. Crop injury, ineffectiveness or other unintended consequences may result because of such factors as weather conditions, presence of other materials, or the manner of use or application, all of which are beyond the control of Bayer CropScience LP . All such risks shall be assumed by the user or buyer.