Stamina F3 HLPlant Protection Product ComparisonPlant Protection Product ComparisonReport inaccuraciesReport inaccuracies

For Use at Commercial Seed Treatment Facilities Only A liquid flowable for control of various seedborne diseases in barley, corn, oats, rye, sorghum, wheat, and triticale

General Information
Stamina F3 HL is a liquid seed treatment used for control or suppression of certain seed borne and soilborne diseases of barley, corn, oats, rye, sorghum, wheat, and triticale. Stamina F3 HL will generally increase emergence and plant stands by controlling or suppressing these diseases.
Seed treatment applications with Stamina F3 HL have been associated with more rapid and increased emergence of seedlings under certain cold conditions. Make all applications according to the use directions in this label. Use the higher rates of Stamina F3 HL when disease pressure is expected to be high. Information regarding the contents and levels of metals in this product is available on the Internet at http://www.aapfco.org/metals.htm. See the following table for diseases controlled or suppressed by Stamina F3 HL.When handling Stamina F3 HL and when treating seed or while au gering or handling treated seed, work in a well-ventilated area.

Application Instructions
For use at commercial seed treatment facilities only. Not for on-farm systems. See Stamina F3 HL fungicide seed treatment Crop-specific Instructions for required application rates for specified crops.
Apply Stamina F3 HL as a water-based mixture using standard or mist-type seed treatment application equipment. The exact amount of water needed to provide the mixture or slurry rate for optimum coverage is difficult to predict because weather conditions, hot or cold, seed type and surface and equipment used all have a bearing on coverage. Consult a seed treatment specialist regarding optimum slurry rates for the crop seed to be treated with Stamina F3 HL. Dilute the required amount of Stamina F3 HL with the amount of water that will provide uniform and complete coverage on the seed surface.Uniform application on seed and complete seed coverage are necessary for seed safety and best disease protection. Seed must be of a good quality and well cleaned prior to treatment. The purchaser of Stamina F3 HL is responsible for ensuring that all seed treated with this product is adequately dyed with a suitable color to prevent accidental use as food for man or feed for animals. Refer to 21 CFR, Part 2.25. Use an EPA-approved dye or colorant that imparts an unnatural color to the seed. Any dye or colorant added to treated seed must be cleared for use under 40CFR, Part 180.900, "Exemptions from the requirement of a tolerance". Federal regulations have
established official tolerances or exemptions from tolerances for residues on food and forage crops that must not be exceeded when the product (dye or colorant) is used at specified rates.
Consult the seed treatment specialist for calibration and operation procedures of the seed treatment equipment being used. Mechanical agitation is required for proper mixing of Stamina P HL. Prepare no more mixture of Stamina F3 HL than is needed for immediate treating. Add 3/4 of the required volume of water to the mix tank. With agitation running, add the required amount of Stamina F3 HL in the tank along with other seed treatment components. Add the remaining 1/4 amount of the required volume of water. Use the mixing sequence that follows. Agitate thoroughly before and during application.

Stamina F3 HL With Tank Mix Partners
Stamina F3 HL mixes easily with water and other waterbased seed treatments manufactured by BASF Corporation. When using Stamina F3 HL in a tank mixture
with other seed treatment products, observe all directions for use, crops/sites, use rates, dilution ratios, precautions, and limitations that appear on the tank mix partner label. Label dosage or application rate must not be exceeded, and the most restrictive label precautions and limitations must be followed. Stamina F3 HL must not be mixed with any product that prohibits such mixing. All applications must be made according to the use directions. When mixing Stamina F3 HL with products from other manufacturers, test the compatibility prior to use by conducting a jar test as follows:
1. Mix all intended seed treatments with the appropriate amount of water in a clear glass container.
2. Mix well and allow to sit for one hour.
3. Remix and observe for incompatibility. Physical compatibility is only part of compatibility. Testing also needs to be done with the seed to make sure the combination of products does not have detrimental effects on the seed.

Tank Mixing Instructions
1. Add 3/4 of the required amount of water to the mix tank and turn on the agitation. Mechanical agitation is preferred.
2. Use the following mixing sequence: dye or colorant, wettable powders, soluble powders, flowable formulations, emulsifiable concentrates, and remaining 1/4 of
the required water. The 1/4 of the required water as the last item for addition to the premix tank can be used as rinsate for the chemical container or to adjust the total slurry to compensate for water displacement by powdered products.
3. Maintain agitation until the entire slurry mixture has been used.
4. Ensure that seed is dry prior to bagging.

Use Restrictions
• DO NOT use treated seed for food, feed or oil processing.
• DO NOT store Stamina F3 HL near feed or foodstuffs.
• DO NOT contaminate feed or foodstuffs.
• DO NOT contaminate domestic or irrigation waters.
• DO NOT plant any crop not listed on this label within 30 days after planting Stamina F3 HL fungicide treated seed.
• DO NOT use the same auger for treating seed that will handle commercial or feed grains.
• DO NOT store leftover treated seed where there is a chance of it becoming mixed with untreated seed. Store treated seed in cool, dry conditions.

TREATED SEED MUST BE LABELED AS FOLLOWS:
"This seed has been treated with Stamina F3 HL containing pyraclostrobin, triticonazole, and metalaxyl. DO NOT use for food, feed or oil processing. DO NOT
plant any crop other than wheat or barley within 30 days after planting Stamina F3 HL treated seed. When opening this bag or loading, pouring, or handling the treated seed, wear long-sleeved shirt, long pants, shoes, socks, and chemical-resistant gloves made of any waterproof material. After the seeds have been planted in soil or other plantingmedia, DO NOT enter or allow worker entry into areas with treated seeds for 12 hours, except that workers may enter the areas with treated seeds without restriction if there will be no worker contact with the soil/media subsurface."