Barmac ZinebPlant Protection Product ComparisonPlant Protection Product ComparisonReport inaccuraciesReport inaccuracies

GENERAL INSTRUCTIONS
Mixing/Application
DILUTE SPRAYING: (Tree and Vine Crops) Use a sprayer designed to apply high volumes of water up to the point of runoff and matched to the crop being sprayed. Set up and operate the sprayer to achieve even coverage throughout the crop canopy. Apply sufficient water to cover the crop to the point of runoff. Avoid excessive runoff. The required water volume may be determined by applying different test volumes, using different settings on the sprayer, from industry guidelines or expert advice. Add the amount of product specified in the Directions for Use table for each 100 L of water. Spray to the point of runoff. The required dilute spray volume will change and the sprayer setup and operation may also need to be changed as the crop grows.
CONCENTRATE SPRAYING (Tree and Vine Crops): Use a sprayer designed and set up for concentrate spraying (i.e. A sprayer which applies water volumes less than those required to reach the point of runoff) and matched to the crop being sprayed. Set up and operate the sprayer to achieve even coverage throughout the crop using your chosen water volume. Determine an appropriate dilute spray volume (See dilute spraying above) for the crop canopy. This is needed to calculate the mixing rate. The mixing rate for concentrate spraying can be calculated in the following way.