Circus 520 ECPlant Protection Product ComparisonPlant Protection Product ComparisonReport inaccuraciesReport inaccuracies

GENERAL INSTRUCTIONS:

MIXING: Add water to the spray tank to 10cm above the level of agitation and ensure vigorous agitation (minimum 100L of water before adding pesticide). For tank mixing, start with soluble liquid formulations, then add RELYON HALOXYFOP 520 HERBICIDE. Half fill spray tank. Add wettable powder or water dispersible granules after RELYON HALOXYFOP 520 HERBICIDE. Finally, add Uptake Spraying Oil or approved alternate oil/wetter and continue filling the tank with required volume, maintaining agitation.

SPRAYING OILS/WETTERS: Uptake Spraying Oil is recommended at 0.5L/100L of spray solution with RELYON HALOXYFOP 520 HERBICIDE. Use non-ionic wetting agent such as BS-1000 at 200mL/100L if not using Uptake or other oils. Adjust oil and wetter amounts based on water volumes.

CANOLA, LUCERNE, MEDIC, AND CLOVER PASTURES AND SEED CROPS: Use Uptake Spraying Oil with lower rates of RELYON HALOXYFOP 520 HERBICIDE or a wetting agent with higher rates unless specified. Do not use oil when mixing with other broadleaf herbicides.

FIELD PEAS AND CANOLA: Uptake Spraying Oil is recommended. Hasten is recommended for tank-mixtures of RELYON HALOXYFOP 520 HERBICIDE and Select Herbicide.

NAVY BEANS, PEANUTS, AND SOYBEANS: Do not add spraying oil when mixing with Blazer or Basagran. Avoid using these tank-mixtures on cowpea.

COMPATIBILITY (Ground Use Only): Check compatibility with insecticides, herbicides, fungicides, and trace elements. RELYON HALOXYFOP 520 HERBICIDE is not compatible with 2,4-D or MPA as sodium or amine salts.

AERIAL USE: Only mix with recommended crop oil or wetter except for specific forestry applications.

APPLICATION: Apply in sufficient water for good coverage. Use calibrated ground rig or aircraft for application. Recommended spray volumes provided for ground and aerial applications.

CLEANING SPRAY EQUIPMENT: Follow equipment cleaning instructions carefully, especially after using broadleaf herbicides. Rinse and decontaminate thoroughly before spraying sensitive crops.