Conquest MCPA 750Plant Protection Product ComparisonPlant Protection Product ComparisonReport inaccuraciesReport inaccuracies

For the selective control of broadleaf weeds in cereals, linseed, oilseed poppies, pastures, rice, sugar cane and turf.

GENERAL INSTRUCTIONS:
Weeds should be sprayed while actively growing and at their most susceptible stage. As a general guide, annuals should be sprayed when young and perennials just prior to appearance of bud stage. Extremes of cold or drought are unfavourable. The best conditions are when the soil is moist, weather fine and rain unlikely within 6 hours of application. DO NOT spray crops or weeds outside the stages indicated in "Critical Comments" as damage, loss of yield or inadequate weed control may result. DO NOT spray in high winds.

APPLICATION/MIXING INFORMATION:
This product mixes readily with water. Half fill the spray tank with clean water and add the required amount of product. Agitate thoroughly before adding the remaining water.
BOOM SPRAYING -Use 30 to 120 litres of water per hectare. Use minimum of 170 litres water per hectare for LINSEED.
AERIAL SPRAYING- Use 10 to 90 litres water per hectare.

COMPATIBILITY/TANK MIXES:
This product can be tank mixed with Diflufenican 500g/L, Metsulfuron-Methyl 600g/L, Dicamba 500g/L, Bromoxynil 200g/L, Flowable Diuron, Clopyralid 300g/L, Serlin, Diquat 250g/L, Flowable Terbutryn, MCPA 420g/L!Picloram 26g/L, and Tribunil. The effectiveness of lmidan and Dimethoate may be reduced by alkaline hydrolysis if tank mixed with this product. For these situations the addition of Conquest Catalyst is recommended. When tank mixing add the required amount of compatible product (and surfactant if recommended) when the spray tank is nearly full and while continuously agitating. If left overnight, agitate thoroughly before spraying.