LinurexPlant Protection Product ComparisonPlant Protection Product ComparisonReport inaccuraciesReport inaccuracies

GROUP C HERBICIDE

For control of certain weeds in cereals, potatoes, carrots, coriander and other crops as specified in the Directions for Use table.

DIRECTIONS FOR USE:
Restraints:
Do Not add wetting agents, surfactants or crop oils.
Do Not apply to weeds under severe stress due to, for example, very dry or wet conditions, disease, etc.
Do Not allow mixture to stand in vat for prolonged periods, as it is difficult to re-suspend and may lose effectiveness.
Do Not apply with misting machines.

WHEAT, BARLEY, OATS
Weed: Group A Three-cornered Jack (Double Gee), Capeweed, Wild Radish, Corn Gromwell, Wild Turnip, Deadnettle, Mustard,
Turnip Weed, Rough Poppy, Slender Thistle
Weed stage: 2 to 3 true leaf approx. 2.5 to 5.0 cm across
State: All States
Rate / ha: 600 mL
State: WA only
Rate / ha: 300 mL + MCPA (500 g/L) 400mL

Weed: Amsinckia, Saffron Thistle
Weed stage: 2 to 3 true leaf approx. 2.5 to 5.0 cm across
State: All States
Rate / ha: 950 mL

Critical comments: Apply when weeds growing well and between 3 and 5 weeks after sowing. Crops generally 3 to 4 leaf (Z13-Z14) stage. Do not add Rhino® or any herbicide to Linurex + MCPA.

POTATOES
Weed: Group A above & other weeds such as: Group B Fat Hen, Shepherd’s Purse, Amaranth (inc. Dwarf, Green, Slim, Red Root, Powells), Blackberry Nightshade, Pigweed
Weed stage: Pre-emergence to 3 to 4 true leaf
State: All States
Rate / ha: 2.4 to 5 L
Critical comments: Apply before 10% of potatoes emerge and after last cultivation or hilling.
Do not cultivate after application. Use lower rate quoted on light soils and increase up to the higher rate for heavy clay soils, or soils high in organic matter.

CARROTS, PARSNIPS
Weed: Group A & Group B above
Weed stage: Pre-emergence
State: All States
Rate / ha: 3.9 to 5 L
Critical comments: Do not use on pure sandy soils. Lower rate generally sufficient, except on heavy clay soils high in organic matter. Apply 1 to 2 days after sowing. Use lower rate quoted on light soils and increase up to the higher rate for heavy clay soils, or soils high in organic matter.

CARROTS
Weed: Group A & Group B See above
Weed stage: 2 to 4 true leaf up to 7 cm
State: All States
Rate / ha: 600 mL
Critical comments: Do not apply before carrots are in 2 to 3 true leaf stage, or if temperature is above 30°C.
Use lower rate quoted on light soils and increase up to the higher rate for heavy clay soils, or soils high in organic matter.

CORIANDER
(Seed Crops)
Weed: Group A & other weeds such as Amsinckia, Saffron Thistle
Weed stage: Post-emergence
State: NSW, Vic, Tas, SA only
Rate / ha: 800 mL to 1.1 L
Critical comments: Apply from 2nd leaf onwards. Higher rates give longer residual control. Wet soil and/or rain is a benefit soon after application.
Do NOT use this product in fresh coriander production. Use lower rate quoted on light soils and increase up to the higher rate for heavy clay soils, or soils high in organic matter.

Weed: Group A & other weeds such as Amsinckia, Saffron Thistle
Weed stage: Pre-emergence
State: NSW, Vic, Tas, SA only
Rate / ha: 800 mL to 1.1 L
Critical comments: Apply immediately after sowing.
Use lower rate quoted on light soils and increase up to the higher rate for heavy clay soils, or soils high in organic matter.

ONIONS
Weed: Group A & Group B See above
Weed stage: Post-emergence
State: All States
Rate / ha: 330 mL to 600 mL
Critical comments: Apply after onions are 15 cm high, with at least 3 leaves. Repeat as necessary.
Use lower rate quoted on light soils and increase up to the higher rate for heavy clay soils, or soils high in organic matter.

SOYBEANS
Weed: Group A & Group B See above
Weed stage: Pre-emergence
State: All States
Rate / ha: 2.5 to 5.0 L
Critical comments: Apply to weed free soil 2 to 3 days after sowing. Beans must be sown at least 2.5 cm deep. Use higher rate for heavy clay soils, or soils high in organic matter.

MAIZE AND SWEET CORN
Weed: Group A & Group B See above
Weed stage: Pre-emergence
State: All States
Rate / ha: 2.5 to 4.0 L

Weed: Barnyard and Summer Grass
Weed stage: Pre-emergence
State: All States
Rate / ha: 5.0 to 6.0 L

Critical comments: Apply as soon after planting as possible.
Use lower rate quoted on light soils and increase up to the higher rate for heavy clay soils, or soils high in organic matter.

Weed: Group A & Group B See above
Weed stage: Post-emergence
State: All States
Rate / ha:
Light Soils 1.1 to 2.5 L
Heavy Soils 2.5 to 5 L

Weed: Barnyard and Summer Grass
Weed stage: Post-emergence
State: All States
Rate / ha:
Light Soils 4.0 L
Heavy Soils 6.0 L

Critical comments: Apply as directed spray to weeds and soil only, when crop is 30 to 45 cm high and weeds less than 15 cm. Early cultivation will increase the difference in height between weeds and crop. Use lower rates when on lighter soil types low in organic matter.

NOT TO BE USED FOR ANY PURPOSE OR IN ANY MANNER CONTRARY TO THIS LABEL UNLESS AUTHORISED UNDER APPROPRIATE LEGISLATION.

WITHHOLDING PERIOD:
CARROTS, CORIANDER: DO NOT APPLY LATER THAN 10 WEEKS BEFORE HARVEST.
CEREALS, MAIZE, ONIONS, PARSNIPS, POTATOES, SOYBEANS, SWEET CORN: WITHHOLDING PERIOD NOT REQUIRED WHEN USED AS DIRECTED.

GENERAL INSTRUCTIONS
Linurex Flowable Herbicide contains 450 g/L Linuron. Linurex Flowable can be applied pre and post-emergence to control certain annual grasses, broadleaved weeds and some seedling perennial weeds in cereal, potatoes, carrots, parsnips, coriander, onions, soybeans, maize and sweet corn. Linurex Flowable is a selective systemic herbicide, absorbed principally by the roots but also by the foliage, with translocation primarily acropetally in the xylem.
Read the Directions for Use before using this product. Shake well before opening.

RESISTANT WEEDS WARNING
Linurex Flowable is a member of the Urea-group of herbicides. This product has the photosynthesis inhibitor mode of action. For weed resistance management Linurex Flowable is a Group C Herbicide. Some naturally occurring weed biotypes resistant to Linuron and other Group C herbicides may exist through normal genetic variability in any weed population. The resistant individuals can eventually dominate the weed population if these herbicides are used repeatedly. These resistant weeds will not be controlled by Linurex Flowable or other Group C herbicides.
However, resistance should not be assumed without first viewing the method of application, the coverage and the timing of application. Resistance to Linuron cannot be predicted and may occur at any time. It is not due to a fault in the product and Adama Australia Pty. Ltd. accepts no liability for any losses that may result from the failure of Linurex Flowable to control resistant weeds.

APPLICATION
Shake well before use. Fill the spray tank with water to three quarters of the required volume, then pour Linurex Flowable into the tank with the agitation system running. Top up to required volume with water while still agitating. If combining with Rhino®, add Linurex Flowable last. Ensure good agitation to give continuous suspension of Linurex Flowable. After use flush out system with clean water and wash nozzles and filters.
BOOM SPRAYS: Use approximately 80 L-110 L water per hectare (ha).
AIRCRAFT: Use 20 L-30 L water per hectare (ha). Do not exaggerate swath width.

COMPATIBILITY
Linurex Flowable may be mixed with Rhino where recommended.
DO NOT add wetting agent.