MCPA 750 SLPlant Protection Product ComparisonPlant Protection Product ComparisonReport inaccuraciesReport inaccuracies

GENERAL INSTRUCTIONS

Weeds should be sprayed while actively growing and at their most susceptible stage.
As a general guide, annuals should be sprayed when young and perennials just prior to appearance of bud stage. Extremes of cold or drought are unfavourable. The best conditions are when the soil is moist, weather fine and rain unlikely within 6 hours following application.
DO NOT spray crops or weeds outside the stages indicated in ‘Critical Comments’ as damage, loss of yield or inadequate weed control may result. DO NOT spray in high winds.

APPLICATION/MIXING INFORMATION
This product mixes readily with water. Half fill the spray tank with clean water and add the required amount of product. Agitate thoroughly before adding the remaining water.

BOOM SPRAYING
• Use 30-120 litres of water per hectare.
• Use minimum of 170 litres water per hectare for LINSEED.

AERIAL SPRAYING
• Use 10 - 90 litres water per hectare.
DO NOT apply this product by air in tank mixtures with diuron.

EQUIPMENT MAINTENANCE AND USAGE
Equipment that has been used for this chemical should not be used for the application of other materials to sensitive plants unless it has been cleaned with Spraymate Tank and
Equipment Cleaner or well washed out with a 2% solution of cloudy ammonia followed by several clear water rinses.

COMPATIBILITY/TANK MIXES
This product can be tank mixed with Lynx WG, Banvel*, Bronco 200, Flowable Diuron, Victory, Spraytop, Terbutrex, Tordon* and Tribunil*. The effectiveness of Imidan*, Le Mat*, Metasystox* and dimethoate may be reduced by alkaline hydrolysis if tank mixed with this product. For these situations the addition of Spraybuff* or Spraymate* L1-700 is recommended. When tank mixing add the required amount of compatible product (and surfactant if recommended) when the spray tank is nearly full and while continuously agitating. If left overnight, agitate thoroughly before spraying.