Nitro 240Plant Protection Product ComparisonPlant Protection Product ComparisonReport inaccuraciesReport inaccuracies

MIXING:
To ensure even mixing, half-fill the spray tank with clean water and add the required amount of product. Add spray additive and agitate thoroughly, then add the remainder of the water. Agitate again before spraying commences.

APPLICATION:
Ground Application: Conquest Nitro 240 Herbicide should be applied with calibrated spray equipment producing a median droplet range of 200 to 300 microns VMD. Apply in a minimum of 50 litres of water per hectare. Use 150 L/ha when spraying dense populations.
Aerial Application: Conquest Nitro 240 Herbicide can be applied through aircraft fitted with boom or Micronair equipment. A spray volume of 20 to 30 L/ha is recommended and equipment should be adjusted to deliver droplets in the range of 200 to 250 microns VMD. Best results will be obtained when aerial applications are made in a light crosswind. Applications should not be made during temperature inversions or in conditions of very low relative humidity. Care should be taken to avoid drift damage to adjoining grass crops.

COMPATIBILTY:
Conquest Nitro 240 Herbicide is compatible with the following grass herbicides: Conquest Atomic, Fusilade, Verdict, Sertin, Correct. (Refer to the Bayer Correct label for detail on adjuvant recommendations for that product).
NOTE: In all situations where Conquest Nitro 240 Herbicide is mixed with another grass herbicide, Conquest Nitro 240 Herbicide should be used at the full label rate specified for the target weed species.
Conquest Nitro 240 Herbicide may also be applied in tank mixtures with one of the following products: Sumi-Alpha 50 EC, Sumi-Alpha Dual, Conquest Alpha Duo 100 EC, and Le-Mat.
Conquest Nitro 240 Herbicide should not be applied in a tank mix with Conquest Defcon 500, Basagran or Blazer. Apply as separate applications. For information on compatibility of products not listed, please refer to Conquest Crop Protection Pty Ltd.