Pyresta Xtreme LVPlant Protection Product ComparisonPlant Protection Product ComparisonReport inaccuraciesReport inaccuracies

A low volatile herbicide for improvement in the brownout of a range of broadleaf and grass weeds, and improved control of marshmallow, long storksbill (Erodium) and wild radish, when used in tank mixtures with Raze , Firebolt or other glyphosate based herbicides.
This is a PHENOXY HERBICIDE that can cause severe damage to susceptible crops such as cotton, grapes, tomatoes, oilseed crops and ornamentals.

GENERAL INSTRUCTIONS

Before opening, carefully read Directions For Use, Precautionary Statements, Safety Directions and First Aid Instructions for Pyresta Xtreme and for the glyphosate product to be added to Pyresta Xtreme.
The addition of Pyresta Xtreme to Raze, Firebolt or other glyphosate products may increase the rate of brownout and final control, when compared to the use of the glyphosate products alone. Refer to the product label for Raze, Firebolt or other glyphosate product and select a rate suitable for the conditions and weed size in each situation.

MIXING AND APPLICATION

Apply by ground application only. Half fill the spray tank with good quality water and begin agitation. While agitating, add the required volume of Pyresta Xtreme then the required volume of Raze, Firebolt or other glyphosate product, followed by the remaining water. Prepare only enough spray solution for immediate use, and do not stand overnight. If tank mixtures are prepared maintain good agitation and use promptly.
Spray equipment should be properly calibrated to ensure correct and uniform coverage. Use sufficient good quality water and configure the boom sprayer to optimise coverage. Apply in 60 to 150 L water per hectare.
DO NOT apply with smaller than Coarse to Very Coarse spray droplets according to the ASAE S572 definition for standard nozzles.

COMPATIBILITY

Pyresta Xtreme is compatible with Raze, Firebolt and other formulations of glyphosate