DIRECTIONS FOR USE:
As this product is not registered for the control of pests in aquatic systems, DO NOT use to control aquatic pests.
DO NOT contaminate irrigation or drinking water supplies or aquatic habitats by cleaning of equipment or disposal of wastes.
TIMING: For best results, spray when weeds are in the seedling stage. Apply in good growing conditions. Application must be made before the crop shields the weeds.
SPRAYER: Wash the tank and clean all filters, screens and tips. Select nozzle tips to apply the recommended volume per hectare. Flood jet type tips are not recommended.
FIELD SPRAYER APPLICATION:
DO NOT apply during periods of dead calm. Avoid application of this product when winds are gusty. DO
NOT apply spray droplets smaller than the American Society of Agricultural Engineers (ASAE S572.1) coarse classification. Boom height must be 60 cm above crop or ground. Adjust boom height to ensure uniform coverage of the weeds. Spray at 5 – 10 kph. Ensure that all tips are in good condition and spraying the same volume.
MIXING: Half fill the tank with clean water. Add the required amount of BRILLIANT and agitate thoroughly. Fill the tank and agitate again before use.
AERIAL APPLICATION (wheat, barley and oats only):
DO NOT apply during periods of dead clam. Avoid application of this product when winds are gusty. DO
NOT apply when wind speed is greater than 16 km/h at flying height at the site of application. DO NOT apply with spray droplets smaller than the American Society of Agricultural Engineers (ASAE S572.1) coarse classification. Nozzle distribution along the spray boom length MUST NOT exceed 65% of the wing- or rotor- span.
Apply only by fixed-wing or rotary aircraft equipment which has been functionally and operationally calibrated for the atmospheric conditions of the area and the application rates and conditions of this label.
Label rates, conditions and precautions are product specific. Read and understand the entire label before opening this product. Apply only at the rate recommended for aerial application on this label. Where no rate for aerial application appears for the specific use, this product cannot be applied by any type of aerial equipment.
Ensure uniform application. To avoid streaked, uneven or overlapped application, use appropriate marking devices.
Volume: BRILLIANT must be applied in volume rates of not less than 20 L/ha. For best results when there is a heavy crop canopy, or when the majority of the weeds are cow cockle, smartweed, hempnettle, pigweed or Canada thistle, a volume rate of 40 L/ha is recommended.
|Registered for cultures||Rate|
|Winter wheat||1 l|
|Spring wheat||1 l|
|Durum Wheat||1 l|