Imazethapyr 240 SL

Manufacturer
DU PONT
Category
Herbicides
Registered until
2025-12-31
Registration number
31156
Active materials
Links

STORAGE
1. Store the leftover product in original tightly closed container.
2. Keep product from freezing. DO NOT store below 0 C. If the product is exposed to temperatures below 0 C during shipment or storage, make sure the product has thawed completely, and shake the container vigorously.
3. DO NOT ship or store the product near food, feed, seed and fertilizers.
4. Store the product in cool, dry, locked, well-ventilated areas without floor drain.

DISPOSAL
Do not reuse this container for any purpose. This is a recyclable container, and is to be disposed of at a container collection site. Contact your local distributor/dealer or municipality for the location of the nearest collection site. Before taking the container to the collection site:
1. Triple- or pressure-rinse the empty container. Add the rinsings to the spray mixture in the tank.
2. Make the empty, rinsed container unsuitable for further use.
If there is no container collection site in your area, dispose of the container in accordance with provincial requirements. For information on the disposal of unused, unwanted product, contact the manufacture or the provincial regulatory agency. Contact the manufacturer and the provincial regulatory agency in case of a spill, and for clean-up of spills.

GENERAL INFORMATION
DuPont Imazethapyr 240 SL is a selective herbicide that can be applied as an early pre-plant, pre-plant incorporated, pre-emergent or post-emergent treatment in various crops. The application method depends upon the crop, anticipated weed spectrum and the preference of the applicator. With early pre-plant and pre-emergent treatments, susceptible weeds emerge, are present as stunted plants and then die. When DuPont Imazethapyr 240 SL is applied post-emergence, absorption may occur through both the roots and foliage. Susceptible weeds stop growing and eventually die.

Eastern Canada Directions:

DIRECTIONS FOR USE
Use DuPont Imazethapyr 240 SL at 312 mL (75 g active) – 420 mL (100 g active) in 400 L of water per hectare. See appropriate rate tables for specific application rates for each crop. NOTE: A NONIONIC SURFACTANT CONTAINING AT LEAST 80% ACTIVE INGREDIENT (e.g. AGRAL 90, AG-SURF) at the rate of 0.25% (v/v) MUST BE ADDED to the spray solution (2.5 L of surfactant per 1000 L of spray solution).

REGISTERED CROPS
Adzuki Beans
Alfalfa Grown for Seed Production
Dry Common Beans (black, Dutch brown, kidney, white, yellow eye and cranberry beans only)
Lima Beans (Ontario only)
Processing Peas
Snap Beans
Snow Peas
Soybeans

PLANT BACK RESTRICTIONS AND ROTATIONAL CROPS
In cases of crop failure, replant only soybeans, kidney beans, cranberry beans, Dutch brown beans, black beans, yellow eye beans, white beans, lima beans, adzuki beans and processing peas in the year of application. Winter wheat may also be re-planted in cases of crop failure or as a rotational crop 100 days following a DuPont Imazethapyr 240 SL application. Soil preparation for re-planting should be no deeper than 10 cm.
Field corn, soybeans, winter wheat, spring wheat, spring barley, kidney beans, cranberry beans, Dutch brown beans, black beans, yellow eye beans, white beans, lima beans, adzuki beans and processing peas may be planted the season following a DuPont Imazethapyr 240 SL application. Conduct a field bioassay (a test strip grown to maturity) the year BEFORE growing any other crop.

MIXING INSTRUCTIONS
1. Ensure the spray tank is clean before use. Follow the clean-out recommendations stated on the label of the product that was previously used.
2. Fill the spray tank one-half full to three-quarters full of water and start agitation.
3. Using a calibrated measuring device, add the required amount of tank mix partner (refer to the tank mixture section of each crop for tank mixtures).
4. Mix thoroughly.
5. Using a separate calibrated measuring device, add the required amount of DuPont Imazethapyr 240 SL to the tank while agitating the spray solution.
6. While the solution remains agitating, add the required amount of non-ionic surfactant if required.
7. If required, add the required amount of liquid fertilizer (28-0-0, 10-34-0 or 32-0-0) to the spray solution.
8. Continue agitation while filling the remainder of the spray tank with water.
9. Clean the spray tank after use.

Western Canada Directions:

DIRECTIONS FOR USE ON FIELD PEAS
DuPont Imazethapyr 240 SL is a selective herbicide that can be applied as an early post-emergence treatment in field peas. When DuPont Imazethapyr 240 SL is applied early post-emergence, absorption may occur through both the roots and foliage. Susceptible weeds stop growing and eventually die.
SOIL ZONES: Black and grey wooded soils
CROPS: Field peas up until the sixth (6th) trifoliate leaf stage

ROTATIONAL CROPS
There is the possibility of residual soil activity from DuPont Imazethapyr 240 SL the year following application. Research studies have shown the following crops can be safely grown in black and grey wooded soil zones the year following a DuPont Imazethapyr 240 SL application:
Spring barley, spring wheat, lentils, alfalfa, field peas
Conduct a field bioassay (a test strip grown to maturity) the year BEFORE growing any other crop than those listed above.

RATES
Apply 50 g active (a.e.) in 100 to 400 litres of water per hectare. Equivalent to 210 mL of product per hectare.
NOTE: A NONIONIC SURFACTANT CONTAINING AT LEAST 80% ACTIVE INGREDIENT (e.g. AGRAL 90, AG-SURF) at the rate of 0.25% (v/v) MUST BE ADDED to the spray solution (2.5 L of surfactant per 1000 L of spray solution)

MIXING INSTRUCTIONS
Fill the spray tank one-half to three-quarters full with water. Using a calibrated measuring device, add the required amount of DuPont Imazethapyr 240 SL while agitating the spray solution. While the solution remains agitating, add the required amount of non-ionic surfactant. Fill the remainder of the tank with water.

DIRECTIONS FOR USE ON NEWLY SEEDED PURE STAND ALFALFA FOR FORAGE OR SEED PRODUCTION
DuPont Imazethapyr 240 SL is a selective herbicide that can be applied as an early post-emergence treatment in newly seeded pure stand alfalfa in the year of establishment. DuPont Imazethapyr 240 SL may be applied when the crop has developed at least one (1) fully expanded trifoliate leaf and up to and including the 4 leaf stage of susceptible weeds. Do not spray before all weeds have emerged. When DuPont Imazethapyr 240 SL is applied early post-emergence, absorption may occur through both the roots and foliage. Susceptible weeds stop growing and eventually die.

CROPS
DuPont Imazethapyr 240 SL may be used on pure stand alfalfa in the year of establishment in the black, grey wooded and irrigated brown soil zones.

USE
DuPont Imazethapyr 240 SL is intended for use on pure stand alfalfa in the year of establishment, on stands that will remain for 3 or more years.

ROTATIONAL CROPS
In the event of crop failure, only field peas may be replanted during the same season as the DuPont Imazethapyr 240 SL application. Do not apply 2 applications of DuPont Imazethapyr 240 SL within the same year.
If necessary, spring wheat, lentils, field peas or alfalfa may be planted the season following a DuPont Imazethapyr 240 SL application in the black, grey wooded and irrigated brown soil zones. Barley may also be planted in the black and grey wooded soil zones the season following application. Conduct a field bioassay (a test strip grown to maturity) BEFORE growing any other crop.

RATES
Apply 50 grams active (a.e.) in 100 to 400 litres of water per hectare.
Equivalent to 210 mL of product per hectare.

NOTE: For early post-emergence applications a NONIONIC SURFACTANT CONTAINING AT LEAST 80% ACTIVE INGREDIENT (AGRAL 90, AG-SURF) at the rate of 0.25% (v/v) MUST BE ADDED to the spray solution (e.g., 2.5 L of surfactant per 1000 L of spray solution).

MIXING INSTRUCTIONS
Fill the spray tank one-half to three-quarters full with water. Using a calibrated measuring device, add the required amount of DuPont Imazethapyr 240 SL while agitating the spray solution. While the solution remains agitating, add the required amount of non-ionic surfactant. Fill the remainder of the tank with water.

Registered for culturesRatePreharvest Interval
Adzuki beans312 ml100
Soybeans312 - 420 ml100
Alfalfa312 - 420 ml100
Beans312 ml100
Peas312 ml50
Snap beans312 ml40
Snow peas312 ml60
Kidney beans312 ml100
Dry lima beans312 ml90