Integrity

Manufacturer
BASF
Category
Herbicides
Registered until
2023-12-31
Registration number
29371
Active materials
Links

For weed control in corn (field and sweet) and soybeans

STORAGE
1. Store the product in original, tightly-closed container and do not allow water to be introduced into this container.
2. DO NOT ship or store the product near food, feed, seed or fertilizers.
3. Store the product in a cool, dry, locked, well-ventilated area without floor drain.
4. Herbicides should be shipped or stored separately from other pesticides to avoid crosscontamination.

DISPOSAL
Recyclable Containers
Do not reuse this container for any purpose. This is a recyclable container, and is to be disposed of at a container collection site. Contact your local distributor/dealer or municipality for the location of the nearest collection site. Before taking the container to the collection site:
1. Triple- or pressure-rinse the empty container. Add the rinsings to the spray mixture in the tank.
2. Make the empty, rinsed container unsuitable for further use.
If there is no container collection site in your area, dispose of the container in accordance with provincial requirements.
For information on disposal of unused, unwanted product, contact the manufacturer or the provincial regulatory agency. Contact the manufacturer and the provincial regulatory agency in case of a spill, and for clean-up of spills.
Returnable-Refillable Containers
For disposal, this container may be returned to the point of purchase (distributor/dealer). It must be refilled by the distributor/dealer with the same product. Do not reuse this container for any other purpose.
For information on disposal of unused, unwanted product, contact the manufacturer or the provincial regulatory agency. Contact the manufacturer and the provincial regulatory agency in case of a spill, and for clean-up of spills.

GENERAL INFORMATION
INTEGRITY will provide control of most annual grass and broadleaf weeds in corn (field and sweet) and soybeans. Reduced weed control may occur if adequate moisture is not received.
INTEGRITY can be applied as a pre-emergence, pre-plant surface or pre-plant incorporated treatment in corn (field and sweet) either alone or in tank-mix combination. INTEGRITY will provide most effective weed control in corn when applied and subsequently incorporated into soil by rainfall or mechanical tillage prior to weed seedling emergence from soil.
INTEGRITY may also be applied as a pre-plant surface or pre-emergence application in reduced or no-till soybeans in tank-mix combination with glyphosate. MERGE Adjuvant is required for optimum burndown activity.
INTEGRITY combines the two active ingredients: saflufenacil, a potent inhibitor of protoporphyrinogen-oxidase (PPO) belonging to herbicide mode of action Group 14, and dimethenamid-P, a chloroacetamide belonging to the herbicide mode of action Group 15. Saflufenacil is rapidly absorbed by roots and foliage with limited systemic activity. Under active growing conditions, susceptible emerged weeds usually develop chlorotic and necrotic injury symptoms within hours and die within a few days. Susceptible germinating weed seeds will usually die as they reach the soil surface or shortly after emergence. Dimethenamid-P is a rootand shoot-inhibitor that controls susceptible weed seedlings before or soon after they emerge from the soil.

DIRECTIONS FOR USE
WEEDS, RATES AND TIMING
Corn (Field and Sweet)
INTEGRITY may be applied to corn as a pre-plant surface (1) , pre-plant incorporated or preemergent treatment at a rate of 1.1 L/ha for season long control of weeds as listed.
INTEGRITY may be applied to corn as a pre-emergent treatment at a reduced rate of 0.73 L/ha for early season control of the following weeds, when an in-crop application of another registered herbicide is planned.
Soybeans
INTEGRITY at a rate of 0.37 L/ha is applied in tank-mix combination with glyphosate and MERGE Adjuvant as a surface application prior to planting or pre-emergent application to reduced or no-till soybeans for burndown control of the following emerged broadleaf weeds and early-season suppression of the following grass weeds. This treatment is to be used when there is a planned in-crop application of another registered herbicide. Consult the glyphosate label for rates and weeds controlled by glyphosate in addition to those listed below, as well as for further recommendations, precautions and restrictions. INTEGRITY is compatible with all liquid glyphosate formulations registered for use as a pre-plant treatment prior to soybeans in which glyphosate is present as an isopropylamine salt, di-ammonium salt or potassium salt.

Apply INTEGRITY in a water volume of 100 to 200 L/ha. For corn, a nitrogen solution or complete liquid fertilizer carrier may be used as a replacement for water for use in pre-plant incorporated or pre-emergent applications. Refer to Liquid Fertilizer section for additional details. DO NOT apply INTEGRITY in liquid fertilizer to soybeans.

MIXING INSTRUCTIONS
1. When applying INTEGRITY, always start with a clean sprayer. Thoroughly clean the sprayer by flushing the system with water containing detergent. Refer to previously applied product labels for specific cleaning instructions.
2. Fill clean spray tank half full with clean water or liquid fertilizer (corn only) and start agitation system. Prior to mixing INTEGRITY or INTEGRITY tank mixtures in liquid fertilizer, refer to appropriate label sections for recommended uses in liquid fertilizer, application instructions and compatibility determinations. For applications in liquid fertilizer, ensure that the mixture is applied within 24 hours of mixing. DO NOT apply INTEGRITY in liquid fertilizer to soybeans.
3. If using a wettable powder or water dispersible granule tank mix partner, add correct amount to tank and continue agitation until thoroughly dispersed. Do not add a wettable powder or water dispersible granule to liquid fertilizer.
4. If required, add the correct amount of liquid or solution tank mix partner. Continue to agitate.
5. Add the correct amount of INTEGRITY while continuing agitation.
6. For applications to soybeans, add the correct amount of MERGE Adjuvant to the spray tank.
7. Continue agitation while filling the spray tank with the remaining amount of water or liquid fertilizer.
8. Maintain continuous and constant agitation throughout application until spraying is complete.
9. After any break in spraying operation, agitate thoroughly before spraying again. Check inside the tank to ensure that sprayer agitation is sufficient to remix the spray materials. Do not allow the mixture to sit over night.
10. If an oil film starts to build up in the tank, drain it and clean the tank with strong detergent solution.
11. Immediately after use, thoroughly clean the sprayer by flushing the system with clean water containing detergent.
Dispose of all rinsings in accordance with provincial regulations.

RECROPPING GUIDELINES INTEGRITY
Rate - Follow Crop
INTEGRITY at 1.1 L/ha
Anytime: corn (field and sweet)
100 days: cereals other than corn
22 months: peppers, onions and sugar beets
11 months: all other crops
INTEGRITY at 0.73 L/ha
Anytime: corn (field and sweet)
100 days: cereals other than corn
22 months: peppers and onions
11 months: all other crops
INTEGRITY at 0.37 L/ha
Anytime: corn (field and sweet)
100 days: cereals other than corn
11 months: all other crops

Registered for culturesRatePreharvest Interval
Corn0.73 - 1.1 l100
Sweet corn0.73 - 1.1 l60
Soybeans0.37 l60