Scholar 230SCPlant Protection Product ComparisonPlant Protection Product ComparisonReport inaccuraciesReport inaccuracies

For control of post harvest diseases on listed crops.

DECONTAMINATION AND DISPOSAL
For information on disposal of unused, unwanted product, contact the manufacturer or the provincial regulatory agency. Contact the manufacturer and the provincial regulatory agency in case of a spill, and for clean up of spills.

PRODUCT INFORMATION
SCHOLAR 230SC Fungicide is a protective fungicide used to aid in the control of post harvest diseases on stone, pome fruits, sweet potato and carrots and for disease control/suppression in ginseng and strawberry.
NOTE: SCHOLAR 230SC Fungicide may be degraded by exposure to direct sunlight. Treated fruit should not be stored in direct sunlight.
FAILURE TO FOLLOW DIRECTIONS AND PRECAUTIONS ON THIS LABEL MAY RESULT IN CROP INJURY, POOR DISEASE CONTROL, AND/OR ILLEGAL RESIDUES.
Spray Equipment
Thorough coverage is necessary to provide good disease control. Applications using sufficient water volume to provide thorough and uniform coverage generally provide the most effective disease control.
For ground application equipment, a minimum of 200 L of water per hectare is recommended.
To avoid spray drift, do not apply when conditions favor drift beyond the target area. Avoid spray overlap, as crop injury may occur.
Equip sprayers with nozzles that provide accurate and uniform application. Calibrate sprayer before use.

DIRECTIONS FOR USE
As this product is not registered for the control of pests in aquatic systems, DO NOT use to control aquatic pests.
DO NOT contaminate irrigation or drinking water supplies or aquatic habitats by cleaning of equipment or disposal of wastes.
Field sprayer application: DO NOT apply during periods of dead calm. Avoid application of this product when winds are gusty. DO NOT apply with spray droplets smaller than the American Society of Agricultural Engineers (ASAE) fine classification. Boom height must be 60 cm or less above the crop or ground.
DO NOT apply by air.
DO NOT apply this product through any type of irrigation system.
For tank mixes, consult the labels of the tank-mix partners and observe the largest (most restrictive) buffer zone of the products involved in the tank mixture and apply using the coarsest spray (ASAE) category indicated on the labels for those tank mix partners.
Use a pump with capacity to maintain the correct rated pressure for the nozzles selected.
Maintain sufficient agitation to keep the mixture in suspension. Use a jet agitator, liquid sparge tube, or mechanical paddle for agitation. Do not air sparge.
It is suggested that screens be used to prevent nozzles from clogging. Screens placed after the tank and before the nozzles should be 50-mesh or coarser. Check nozzle manufacturer’s recommendations.
For more information on spray equipment and calibration, consult sprayer manufacturers and provincial recommendations.
Use SCHOLAR 230SC Fungicide as a post-harvest dip and drench immediately before the storage of fruit for the control of the post-harvest diseases listed.