Solo WDG Herbicide For Clearfield Crops
FOR SALE FOR USE IN THE PRAIRIE PROVINCES AND PEACE RIVER AREA OF BRITISH COLUMBIA ONLY
Store above 5 C.
Store in a cool, dry place away from children, animals, food, feed or fertilizers.
Keep unused water-soluble bags in resealed original container.
Keep packages dry at all times.
Keep packages out of rain.
Keep from freezing.
1. Make the empty container unsuitable for further use.
2. Dispose of the container in accordance with provincial requirements.
3. For information on disposal of unused, unwanted product, contact the manufacturer or the provincial regulatory agency. Contact the manufacturer and the provincial regulatory agency in case of a spill, and for clean-up of spills.
FOR IMAZETHAPYR AND IMAZAMOX TOLERANT CANOLA (e.g., Canola varieties with the CLEARFIELD trait)
DIRECTIONS FOR USE (Prairie Provinces and Peace River Area of British Columbia only)
SOLO WDG herbicide (CLEARFIELD crops) is a selective herbicide that can be applied as an early post-emergence treatment in field peas and imazethapyr and imazamox tolerant canola. When SOLO WDG herbicide (CLEARFIELD crops) is applied early post-emergence, absorption may occur through both the roots and foliage. Susceptible weeds stop growing and eventually die.
Apply using ground equipment only. DO NOT APPLY BY AIR.
Do not apply more than once per year.
DO NOT graze the treated imazethapyr and imazamox tolerant canola or cut for hay within 20 days of application.
Pre-harvest Interval: After 60 days, canola can be harvested.
Apply in 100 L/ha of water with MERGE Adjuvant at a rate of 0.5% v/v (e.g. 5 L of MERGE Adjuvant per 1000 L spray solution).
Application should be made from the 2 - 6 true leaf stage of the canola crop and after the weeds have emerged. To control broadleaf weeds, apply SOLO WDG herbicide (CLEARFIELD crops) from the 1 - 4 true leaf stage until early tillering. Initial transient crop yellowing may be observed after application but this is outgrown and should not affect yield.
Use 100 L/ha of water. Use a 50-mesh (or coarser) filter screen. Fill the spray tank with threequarters of the required amount of clean water, start agitation and continue agitation throughout the entire mixing and spraying procedure. Add the required amount of SOLO WDG herbicide (CLEARFIELD crops) soluble bag(s) directly into the sprayer through the tank opening. Agitate for at least ten minutes to dissolve the herbicide. After the herbicide is dissolved, continue agitation and add the required amount of MERGE Adjuvant. If excess foaming occurs, a silicone anti-foaming agent may be added (e.g. HALT). Complete filling the tank to the desired level with water. If agitation is stopped for more than 5 minutes, re-suspend spray solution by full agitation prior to commencing spraying again. Between loads of SOLO WDG herbicide (CLEARFIELD crops), check in-line and nozzle screens and rinse and clean if necessary. Upon completion of spraying SOLO WDG herbicide (CLEARFIELD crops), thoroughly flush tank, boom, hoses and in-line and nozzle screens with clean water to avoid possible injury to other crops.
Initial crop injury to non-imazethapyr and non-imazamox tolerant canola (non-CLEARFIELD canola) may be observed. Avoid spray overlap as yield reduction may result. The following crops may be grown safely the year following an application:
Imazethapyr and imazamox tolerant canola (CLEARFIELD Canola)
Non-imazethapyr and non-imazamox tolerant canola (non-CLEARFIELD canola)
There are insufficient data for other follow crops. Conduct a field bioassay (a test strip grown to maturity) the year before growing any crop other than those listed above.
|Registered for cultures||Rate||Preharvest Interval|