Conviso OnePlant Protection Product ComparisonPlant Protection Product ComparisonReport inaccuraciesReport inaccuracies

For use only as an agricultural herbicide. A highly active herbicide (a combination of two ALS-inhibiting herbicides) with foliar and some root activity which controls a range of annual broadleaved weeds and grass weeds in sugar beet and fodder beet carrying the Conviso Smart brand.

DIRECTIONS FOR USE

IMPORTANT: This information is approved as part of the Product Label. All instructions within this section must be read carefully in order to obtain safe and successful use of this product.

RESTRICTIONS
CONVISO ONE MUST ONLY BE USED ON CONVISO SMART SUGAR BEET OR FODDER BEET HYBRID VARIETIES. COMPLETE CROP LOSS WILL OCCUR IF CONVISO ONE IS APPLIED TO SUGAR BEET OR FODDER BEET
THAT DOES NOT CARRY THE CONVISO SMART BRAND.
DO NOT use in any non-approved tank mixture or sequence with any other ALS inhibitor, such as a sulfonylurea.
Conviso One must not be applied to any crop suffering from stress as a result of drought, heat, frost, water-logging, pest or disease attack, nutrient deficiency, soil compaction or other factors reducing crop growth.
Because some non-target crops are sensitive to Conviso One, extreme care is required to avoid drift onto plants outside the target area, or onto ponds, waterways or ditches.
Under adverse conditions, crop effects may be observed following treatment, particularly on spray overlaps and for late season/spring applications.

CROP SPECIFIC INFORMATION
Conviso One can be used on any Conviso Smart sugar beet or fodder beet hybrid. For a list of current Conviso Smart beet hybrids, contact Bayer Crop Science.
Apply Conviso One via a horizontal boom sprayer in 100 – 300 L/ha water as a FINE to MEDIUM spray (BCPC category). Use application techniques which ensure good weed coverage and crop penetration. Ensure that spray swaths do not overlap. For optimum results, apply Conviso One during warm weather, when the soil is moist and the weeds actively growing. Dry conditions resulting in moisture stress may reduce effectiveness.
Apply using a pressure of 2.5 – 3.0 bar and a spray quality of FINE TO MEDIUM (BCPC category).
Apply at a dose rate of 1 L/ha, post-emergence from the first leaf visible stage of the crop (GS 10) up to and including the eight-leaf stage of the crop (GS 18).
Alternatively, one application of 0.5 L/ha may be made from the first leaf visible stage of the crop (GS 10) up to and including the four-leaf stage of the crop (GS 14). A second application of 0.5 L/ha should be made from the two-leaf stage (GS 12) up to and including the eight-leaf stage (GS 18). A minimum interval of 10 days must elapse between applications.