Conquest Amine 300Plant Protection Product ComparisonPlant Protection Product ComparisonReport inaccuraciesReport inaccuracies

For the control of emerged broad leaved weeds prior to sowing crops and pastures in conservation tillage situations and for selective weed control in the crops and situations.
This is a PHENOXY HERBICIDE that can cause severe damage to susceptible crops such as cotton, grapes, tomatoes, oilseed crops and ornamentals.

GENERAL INSTRUCTIONS
Conquest Amine 300 Selective Herbicide is a water soluble liquid product with non-selective herbicidal activity against broad leaf weeds.
Conquest Amine 300 Selective Herbicide will control emerged weeds only, and provides no residual control although certain plant back periods should be observed. Conquest Amine 300 Selective HerbiCide is absorbed by plant foliage and accumulates to toxic levels in the regions of growth and reproduction, upsetting the ability of plants to balance the synthesis and use of nutrients. Visible effects are a gradual yellowing and wilting of the plants which advances to compllete browning of above ground growth and deterioration of root systems. Effects may not be apparent for 7-10 days or even up to 21 days under cold or cloudy conditions.

Application
Boom Equipment
Application of Conquest Amine 300 Selective or Conquest Glyphosate 450 Herbicide (Giyphosate) mixtures in spray volumes of 25-100L/Ha is recommended. When sulfonylureas are included in the spray mixture a minimum volume of 30 UHa is recommended. When Simazine is included in the mixture a minimum spray volume of 100L/Ha is recommended. Flat fan pbzzle equipment is recommended using pressures in the range 240- 280 kPa. Boom height must be set to ensure double overlap of nozzle patterns at the top of the weed canopy.
Aerial Equipment
Application of Conquest Amine 300 Selective or Conquest Glyphosate 450 Herbicide (Giyphosate) mixtures using either Micronair or boom equipment should occur in a minimum spray volume of 15L/Ha. Droplets with an average size of 250-350 micron diameter are recommended. Swath width should be 15-17 metres.
Application under hot conditions: High temperature and/or low relative humidity cause excessive evaporation of spray droplets, which may reduce results. When temperatures reach 25°C increase water volume to 30L/Ha, and increase droplet size to at least 300-micron diameter.
DO NOT apply by aircraft when temperature is above 35°C
DO NOT use in intensive horticultural cropping areas,
Thoroughly wash aircraft, especially landing gear after each day of spraying to remove herbicide residues.

Compatibility
Conquest Amine 300 Selective Herbicide can be tank mixed with the products Conquest Glyphosate 450 Herbicide {Giyphosate) Conquest Chlorsulfuron 750 WG Herbicide {Chlorsulfuron), or Conquest Metsulfuron 600 WG Herbicide (Metsulfuron Methyl), Chlorpyrifos as well as Dicamba aqueous concentrates, Simazine and Atrazine Flowables, Paraquat!Diquat, Dimethoate and Omethoate.