Ziram WGPlant Protection Product ComparisonPlant Protection Product ComparisonReport inaccuraciesReport inaccuracies

GENERAL INSTRUCTIONS:

Application: Apply before disease symptoms appear. Spray thoroughly to cover stems, leaves, buds, and flowers.

Mixing/Application: No pre-mixing required. Add about 25% of the required water volume to the spray vat. Slowly add the product with continuous agitation. Add a non-ionic wetting agent like SST Vitiwet to the full spray tank.

Dilute Spraying (Tree and Vine Crops): Use a sprayer for high water volumes up to the point of run-off. Match the sprayer to the crop. Ensure even coverage throughout the crop canopy. Adjust spray volume and setup as the crop grows. Add the specified amount of product per 100L of water.

Concentrate Spraying (Tree and Vine Crops): Use a sprayer for concentrate spraying. Achieve even coverage throughout the crop with the chosen water volume. Determine dilute spray volume for the crop canopy. Calculate concentrate mixing rate.

Example for Concentrate Spraying: Dilute spray volume: e.g., 1,500L/ha. Chosen concentrate spray volume: e.g., 500L/ha. Concentration factor: 3 x (1500L/500L = 3). If the dilute rate is 150g/100L, then the concentrate rate becomes 3 x 150, i.e., 450g/100L.

Resistance Warning: Group M3 Fungicide. Manage fungicide resistance. Resistant fungi may not be controlled, leading to reduced efficacy and yield loss.

Precautions:

Protection of Livestock: Low hazard to bees. May be applied on any plants at any time.

Protection of Wildlife, Fish, Crustaceans, and Environment: Dangerous to fish. DO NOT contaminate streams, rivers, or waterways.

Storage and Disposal: Store in the closed, original container in a cool, well-ventilated area. Keep away from direct sunlight, children, animals, food, feedstuffs, seed, and fertilizers. Single-rinse or shake remainder into the spray tank. Do not dispose of undiluted chemicals on-site. Puncture and deliver empty packaging to an approved waste management facility. If unavailable, bury empty packaging 500 mm below the surface in a disposal pit following regulations. Do not burn empty containers or product.

Safety Directions: Poisonous if inhaled; harmful if swallowed. Product is corrosive and attacks eyes. Will irritate the skin; repeated exposure may cause allergic disorders. Avoid contact with eyes and skin; do not inhale dust or spray mist. When preparing and using the spray, wear protective clothing and goggles. Wash hands, arms, and face thoroughly after use. Wash gloves, goggles, and contaminated clothing after each use.