Inspire Super

Manufacturer
SYNGENTA
Category
Fungicides
Registered until
2027-12-31
Registration number
30827
Active materials
Links

For Use in Controlling Diseases in Labelled Crops.

STORE IN A COOL, DRY PLACE. Do not store food, beverages or tobacco products in storage area. To prevent product from freezing store from -10 to 40 C.
If this pest control product is to be used on a commodity that may be exported to other countries in the world and you require information on acceptable residue levels in these countries, please contact Syngenta Canada Inc. at 1-87-SYNGENTA / 1-877-964-3682.

DECONTAMINATION AND DISPOSAL
For information on disposal of unused, unwanted product, contact the manufacturer or the provincial regulatory agency. Contact the manufacturer and the provincial regulatory agency in case of a spill, and for clean up of spills.

GENERAL INFORMATION
INSPIRE SUPER Fungicide is a broad spectrum fungicide containing two active ingredients and is recommended for the control of the listed diseases in pome fruit, grape, Amur river grape, gooseberry, blueberry (highbush and lowbush), currant, elderberry, huckleberry, and highbush cranberry. INSPIRE SUPER Fungicide may be applied as a foliar spray in alternating spray programs or in tank mixes with other crop protection products. All applications must be made according to the use directions that follow.
FAILURE TO FOLLOW DIRECTIONS AND PRECAUTIONS ON THIS LABEL MAY RESULT IN CROP INJURY, POOR DISEASE CONTROL, AND/OR ILLEGAL RESIDUES.

GENERAL USE DIRECTIONS
GROUND SPRAYER APPLICATION
Field sprayer application:
DO NOT apply during periods of dead calm. Avoid application of this product when winds are gusty. DO NOT apply with spray droplets smaller than the ASAE fine classification. Boom height must be 60 cm or less above the crop or ground.
Airblast application:
DO NOT apply during periods of dead calm. Avoid application of this product when winds are gusty. DO NOT direct spray above plants to be treated. Turn off outward pointing nozzles at row ends and outer rows. DO NOT apply when wind speed is greater than 16 km/h at the application site as measured outside of the treatment area on the upwind side.
DO NOT apply by air.

Mixing Procedures
Prepare only the amount of spray mixture that is needed for the immediate operation. Thoroughly clean spray equipment before using this product. Vigorous agitation is necessary for proper dispersal of the product especially after exposure to freezing conditions. Maintain maximum agitation throughout the spraying operation. Do not let the spray mixture stand overnight in the spray tank. Flush the spray equipment thoroughly following each use and apply the rinsate to a previously treated area.

INSPIRE SUPER Fungicide Alone
1. Add 1/2-2/3 of the required amount of water to the spray or mixing tank.
2. With the agitator running, add INSPIRE SUPER Fungicide to the tank.
3. Continue agitation while adding the remainder of the water.
4. Begin application of the spray solution after INSPIRE SUPER Fungicide has completely dispersed into the mix water.
5. Maintain agitation until all of the mixture has been sprayed.

INSPIRE SUPER Fungicide + Tank Mixtures
To determine the physical compatibility of INSPIRE SUPER Fungicide with tank-mix partners, use a jar test. Using a jar, add proportionate amounts of the products and water. Add wettable powders and water dispersible granular products first, then liquid flowables, and emulsifiable concentrates last. After thoroughly mixing, let stand for at least 5 minutes. If the combination remains mixed or can be remixed readily, it is physically compatible. Once compatibility has been proven, use the same procedure for adding required ingredients to the spray tank.
Mixing in the Spray Tank
1. Add 1/2-2/3 of the required amount of water to the spray or mixing tank.
2. With the agitator running, add the tank-mix partner(s) into the tank in the same order as described above.
3. Allow the material to completely dissolve and disperse into the mix water. Continue agitation while adding the remainder of the water and INSPIRE SUPER Fungicide to the spray tank.
4. Allow INSPIRE SUPER Fungicide to completely disperse.
5. Spray the mixture with the agitator running.
6. Observe all directions for use, crops/sites, use rates, dilution ratios, precautions, and limitations which appear on the tank mix product label.
7. Label dosage rate must not be exceeded, and the most restrictive label precautions and limitations must be followed.
8. This product must not be mixed with any product which prohibits such mixing.

DIRECTIONS FOR USE
Apply the higher rate and shorter interval under conditions of high disease pressures. Make no more than two (2) sequential applications of INSPIRE SUPER Fungicide before alternating with another registered fungicide with a different mode of action.

Registered for culturesRatePreharvest Interval
Apples560 - 836 ml14
Crabapples560 - 836 ml14
Pears560 - 836 ml14
Quince560 - 836 ml14
Blueberries558 - 1475 ml
Gooseberries836 - 1161 ml14
Black currant836 - 1161 ml
Red currant836 - 1161 ml
White currant836 - 1161 ml
Elderberries836 - 1475 ml
Huckleberries836 - 1475 ml
Cranberries836 - 1475 ml
Grapes836 - 1475 ml14