Media MCPA Ester 600

Registered until
Registration number
Active materials


As this product is not registered for the control of pests in aquatic systems, DO NOT use to control aquatic pests.
DO NOT contaminate irrigation or drinking water supplies or aquatic habitats by cleaning of equipment or disposal of wastes.
DO NOT enter or allow worker entry into treated areas during the restricted-entry interval (REI) of 12 hours.

Spray buffer zones for the protection of terrestrial habitats are not required for use on roadside rights-of-way.
For tank mixes, consult the labels of the tank-mix partners and observe the largest (most restrictive) spray buffer zone of the products involved in the tank mixture and apply using the coarsest spray (ASAE) category indicated on the labels for those tank mix partners.
The spray buffer zones for this product can be modified based on weather conditions and spray equipment configuration by accessing the Spray Buffer Zone Calculator on the Pesticides portion of the website.
Apply in 50 to 200 litres of water per hectare by ground equipment unless otherwise indicated. Higher water volumes will reduce the risk of crop injury.
Apply in a minimum of 30 litres of water per hectare by aerial equipment.
Use spray nozzles and pressures that deliver a medium to coarse quality spray.
Avoid generating fine, driftable droplets.
For knapsack, spot treatment applications, mix 165 mL of product in 10 L water. Spray to wet all foliage thoroughly.

MEDIA MCPA Ester 600 may be recommended in tank mix with other products. Tank mixes are generally used to broaden or extend control of the weed spectrum present.
Tank mix herbicides must be registered for intended use. Read and follow all label directions for each tank mix herbicide. Always follow precautions and restrictions on the most restrictive tank mix partner.
In some cases, tank mixing a pest control product with another pest control product or a fertilizer can result in biological effects that could include, but are not limited to: reduced pest efficacy or increased host crop injury. The user should contact Sharda Cropchem
Limited at 1-844-810-5720 or 1-416-840-5639 for information before mixing any pesticide or fertilizer that is not specifically recommended on this label.

Use the dose required to control the weeds present.
To minimize the risk of crop injury, do not exceed the recommended rate listed for the crop.
Higher rates may be required to control certain weed species. Rates above those recommended for a crop may result in significant crop injury, and should only be used when the risk of crop injury will be offset by the benefits of enhanced weed control.
Apply in warm weather when the crop and weeds are growing well, and the weeds are at a susceptible stage.
Avoid application during drought conditions or during exceptionally hot weather.


Registered for culturesRate
Spring wheat0 - 1.05 l
Spring barley0 - 1.05 l
Spring rye0 - 1.05 l
Spring oats0 - 0.9 l
Winter wheat0 - 1.05 l
Winter rye0 - 1.05 l
Winter flax0 - 0.7 l
Spring flax0 - 0.7 l