Triton C

Registered until
Registration number
Active materials

Triton C Herbicide is a combination package of products Accord Dry Flowable Bulk Herbicide and Refine SG


Store product in original container only, away from other pesticides, fertilizer, food or feed. Not for use or storage in or around the home. Keep container closed.

1. Triple-or pressure-rinse the empty container. Add rinsings to the spray mixture in the tank.
2. Follow provincial instruction for any required additional cleaning of the container prior to its disposal.
3. Make the empty container unsuitable for further use.
4. Dispose of the container in accordance with provincial requirements.
5. For information on the disposal of unused, unwanted product, contact the manufacturer or the provincial regulatory agency. Contact the manufacturer and the provincial regulatory agency in case of a spill, and for clean-up of spills.

TRITON C Herbicide is recommended for selective post-emergent control or suppression of broadleaf weeds in spring wheat, durum, and spring barley, not under seeded to legumes or grasses.
TRITON C Herbicide contains 3 active ingredients formulated as dry flowable, or water soluble granules. It is non-corrosive, non-flammable, non-volatile and does not freeze. Should product be exposed to freezing temperatures, warm to room temperature prior to use.
Use gloves and goggles when handling the product. Each unit area jug must be emptied completely into the spray tank and not resealed with product remaining inside.
TRITON C Herbicide is to be mixed with water and Merge adjuvant and applied as a uniform broadcast spray. Apply early post emergence, to the main flush of actively growing broadleaf weeds. APPLY WITH GROUND EQUIPMENT ONLY.
Warm, moist growing conditions promote active weed growth and enhance the activity of TRITON C Herbicide by allowing maximum foliar uptake and contact activity. Weeds hardened off by cold weather or drought stress may not be adequately controlled or suppressed and regrowth may occur. For best results, ensure thorough spray coverage of target weeds. See "DIRECTIONS FOR USE" section of this label for complete use details.
TRITON C Herbicide stops growth of susceptible weeds rapidly. However, typical symptoms of dying weeds, including twisting, chlorosis, stunting and discolouration, may not be noticeable for 1 to 3 weeks after application, depending upon growing conditions and weed susceptibility. Degree of control and duration of effect are dependent on weed sensitivity, weed size, crop competition, growing conditions at and following treatment, and spray coverage.
TRITON C Herbicide may provide residual activity in soil, and for this reason treated fields cannot be rotated to crops and recrop intervals other than specified in the section Replanting to Other Crops.

Injury to or loss of desirable trees or vegetation may result from failure to observe the following:
Do not apply, drain or flush equipment on or near desirable trees or other plants, or on areas where their roots may extend, or in locations where the chemical may be washed or moved into contact with their roots.
Do not use on lawns, walks, driveways, recreational grounds or similar areas.
Prevent drift of spray to desirable plants.
Do not contaminate any body of water, including irrigation water that may be used on other crops.
Carefully observe sprayer clean-up instructions, as spray tank residues may damage crops other than wheat, spring barley or oats.

Minimum recropping interval (months) - Crop
0 - Spring wheat, durum, spring barley
10 - Canola, field peas, flax (1), lentils (1), sunflower
12 - Oats 
(1) On lighter soils with low organic matter or under dry conditions, some crop injury may occur particularly in flax and lentils. Under these conditions, the minimum recropping interval for flax and lentils should be extended by 12 months.
TRITON C Herbicide should not be used on land where potatoes or vegetables are part of the rotation.
Other crops should only be planted after a field bioassay has shown that it is safe to do so. A successful field bioassay means growing to maturity a test strip of the crop(s) intended for production the following year.

Select a spray volume that will ensure thorough coverage and a uniform spray pattern. Use a minimum of 55 L of spray volume per hectare. If tank mixing with other herbicides, always consult the label of the tank mix partner(s) for minimum spray volume requirements and apply the tank mixture using a water volume recommended for all products.
1. Fill the spray tank 1/4 to 1/3 full with fresh water. 
2. Add the recommended amount of TRITON C Herbicide to the spray tank while the agitator is running. Agitate for a minimum of 5 minutes before adding tank mix partners. Continuous agitation is recommended through the entire mixing procedure to ensure products are completely dissolved and/or in suspension.
3. After TRITON C Herbicide is in suspension, other tank mix components may be added while continuing to fill the tank with water. The proper sequence for tank mix components is:
a. dry formulations
b. emulsifiable concentrates
c. adjuvants (a recommended adjuvant must be added to improve wetting and contact activity)
d. If a drift control agent is to be tank mixed, it is to be added last.
For repeat loads, reduce the tank heel to 10% or less of the previous load. Fill tank with fresh water as described in step 1, and continue as directed. Emulsifiable concentrates may make dispersion of TRITON C Herbicide more difficult. For that reason, tank heels of the previous tank mix should be kept to 10% or less of the spray tank volume.

Registered for culturesRatePreharvest Interval
Spring wheat97 g77
Spring barley97 g80