Metri 4FPlant Protection Product ComparisonPlant Protection Product ComparisonReport inaccuraciesReport inaccuracies

PRODUCT INFORMATION
MIXING
When using METRI 4F, make sure the sprayer is completely clean, free of rust or corrosion which occurs from Winter storage. Examine strainers and screens to be sure the sprayer is clean from previously used pesticides.
Any tank mix containing METRI 4F should be kept agitated and sprayed out immediately. Do not allow tank mixes to stand for prolonged periods of time.
The proper mixing procedure for METRI 4F alone or in tank mix combinations with other herbicides is:
1. Fill the spray tank 'A to 1/3 full with clean water.
2. Add recommended rate of METRI 4F while recirculating and with agitator running.
3. Follow the triple rinse procedure described under "STORAGE AND DISPOSAL" to insure that all product is removed from the container.
4. Mix thoroughly and add clean water to fill spray tank to desired level.
5. Add the other herbicide to tank last and agitate thoroughly.
6. Continue agitation during application and until sprayer tank is empty.
SOIL TEXTURE: As used on this label, "Coarse soils" are loamy sand or sandy loam soils. "Medium soils" are loam, silt loam, silt, sandy clay, or sandy clay loam. "Fine soils" are silty clay, silty clay loam, clay, or clay loam. Silty clay loam soils are transitional soils and may be classified as medium textured soils in some regions of the U.S.

USE RESTRICTIONS
Do not use on other crops grown for food or forage. Apply this product only as specified on this label.
Do not allow sprays to drift on to adjacent desirable plants.
Observe all cautions and limitations on labeling of all products used in mixtures.
Do not rotate any crop not listed on this label for 18 months following application.
For all uses: Low-pressure and high volume hand-wand equipment is prohibited.

CHEMIGATION
METRI 4F is recommended for application through sprinkler irrigation equipment to potatoes, soybeans, tomatoes, and asparagus as directed on this label. Refer to the crop sections of this label for rates, weeds controlled or suppressed, restrictions, and special precautions.
Apply this product only through sprinkler (including center pivot, lateral move, or solid set) irrigation systems. Do not apply this product through any other type of irrigation system. Crop injury, lack of effectiveness, or illegal pesticide residues in the crop can result from nonuniform distribution of treated water.