AtragranzPlant Protection Product ComparisonPlant Protection Product ComparisonReport inaccuraciesReport inaccuracies

GENERAL INSTRUCTIONS
Atragranz is a pre and post emergent herbicide that controls weeds from seed and weed seedlings. However, established perennial species, large annuals, and large broadleaf weeds are not satisfactorily controlled at the rates recommended.
It acts mainly through root absorption, its effectiveness depends on the occurrence of control rainfall or irrigation to move it down into the weed zone. Duration and effectiveness of control depends on the amount of chemical applied, soil type, rainfall and particular weed species.
The maximum rate of atrazine application in all crops except plantation forestry is limited to an amount of product equivalent to 3 kg a.i. atrazine/ha per year. DO NOT exceed this limit, especially when applying an atrazine herbicide post-emergence, where an atrazine herbicide has been applied pre-emergence.
The maximum rate of application in plantation forestry is an amount of product equivalent to 4.5 kg a.i. atrazine per year in sandy soils and those defined as highly erodible, and product equivalent to 8 kg a.i. atrazine/ha per year in clay loam and heavier textured soils.

Mixing
DO NOT Mix, load or apply within 20 m of any well, sink hole or intermittent or perennial stream or river. This product readily mixes with water. Add required quantity to the spray vat with the tank filter mesh removed and the vat 50 to 75 % full with water. The agitation system should be running during addition of the product and during the spraying operation. If left to settle, stir and re-suspend any settled material before starting pump and spraying product. Avoid drawing accumulated particles into outlet pipe. DO NOT pre-mix in a bucket as a paste. Wetting Agent: Add Agral at 125 mL/100L or BS1000 at 75 mL/100L of spray mixture when applying to emerged weeds as a foliar spray.