Atrazine 500 SCPlant Protection Product ComparisonPlant Protection Product ComparisonReport inaccuraciesReport inaccuracies

GENERAL INSTRUCTIONS

DO NOT APPLY MORE THAN 6 LITRES PRODUCT/HA/YEAR EXCEPT IN FORESTRY SITUATIONS. This product can be used both pre- and post-emergent to selectively control weeds. It can also be used to control weeds in Triazine Tolerant Canola varieties. Established perennial species will not be controlled at the rates recommended. Duration and effectiveness of control depends on the amount of chemical applied, soil type, rainfall, weed species and other conditions. Sufficient moisture (either rainfall or irrigation) is required to move the product into the root zone of weeds to make the product effective. This should occur within 10 days of application to ensure product effectiveness.
DO NOT apply more than 6 litres per hectare per year for all crops except forestry.
DO NOT apply more than 9 litres per hectare per year in forestry situations in sandy soils and soils classed as highly erodible and not more than 16 litres per hectare per year for clay loams and heavier textured soils.

MIXING

DO NOT mix, load or apply this product within 20 m of any well, sink hole, intermittent or perennial stream. Stir the product or invert the container prior to use in case settling has occurred in storage. Partially fill the spray tank with water and maintain agitation while adding the required quantity of Sipcam Atrazine 500 SC Herbicide. Agitation should continue after filling and during spraying. If spray is allowed to stand, agitate thoroughly before resuming spraying.

COMPATIBILITY

This product is compatible with Glyphosate 360 and Glyphosate 450, paraquat, paraquat/diquat mixtures and amitrole. It is advisable that a small scale compatibility test be carried out prior to tank mixing with other products. In sugar cane only, the addition of Sodium 2,4-D will assist in short term suppression of Nutgrass and other sedges