BromoxapacPlant Protection Product ComparisonPlant Protection Product ComparisonReport inaccuraciesReport inaccuracies

GENERAL INSTRUCTIONS

Before opening, carefully read Directions for Use, Precautionary and Protection Statements, Storage and Disposal, Safety Directions, and First Aid Instructions.

MIXING

To ensure even mixing, half fill spray tank with clean water and add the required amount of this product. Agitate thoroughly, then add the remainder of water. Agitate again before spraying commences.

APPLICATION

DO NOT use rain-drop or air-induction nozzles as coverage of weeds may not be adequate.

Boom Sprayer: Calibrate the machine before use to ensure that the correct application rate is obtained. Check height of boom above the crop to ensure that the spray is evenly distributed.

Cereals: Apply 50-200 L of water per hectare. Use higher water volume (min. 100 L/ha) where the weed infestation is heavy, the crop cover is dense, or when tank-mixing with DIMOP 500. Complete coverage of weeds is essential.

Linseed: Apply a minimum of 220 L of water per hectare.

Turf: Apply a minimum of 500 L of water per hectare.

Aerial Application: Apply a minimum of 22 L of water per hectare or 30 L of water per hectare if tank-mixing with DIMOP 500. Markers should always move upwind before the aircraft passes overhead. Application by micronaire equipment may give variable results.

EQUIPMENT MAINTENANCE

After use, wash application equipment thoroughly with Spraymate Tank & Equipment Cleaner and rinse several times.

COMPATIBILITY

When mixed with METFURON or DICAM, do not apply to cereals undersown with lucerne. When mixed with DIMOP 500, DO NOT exceed 1.4 L of this product per hectare. Observe all instructions on the mixture partner label. As formulations of other manufacturers' products are beyond the control of Indigo Specialty Products Pty Ltd, all mixtures should be tested prior to mixing commercial quantities.