Stuka FlexiPlant Protection Product ComparisonPlant Protection Product ComparisonReport inaccuraciesReport inaccuracies

GENERAL INSTRUCTIONS

FARMALINX Stuka Flexi Herbicide is designed for use as a herbicide, and its application involves various methods. The following are general instructions for mixing, compatibility, and application methods. Always refer to the specific product label for detailed and accurate information.

MIXING

1. Mix FARMALINX Stuka Flexi Herbicide in water only.
2. Mix only the required amount for each day's use to avoid storing the mix.
3. Half fill the spray tank with water.
4. Add the specified quantity of FARMALINX Stuka Flexi Herbicide.
5. Complete filling the tank and agitate continuously for thorough mixing before and during application.

Tank Mixtures:

• Wettable powder or dry flowable formulations should be added first.
• Followed by suspension concentrates, water-soluble salts, and emulsifiable concentrate formulations.
• Add spraying oils and surfactants (wetters) last, if required.

COMPATIBILITY

FARMALINX Stuka Flexi Herbicide is compatible with specific herbicides, adjuvants, and insecticides. Always read and follow the label directions, restraints, plant-back periods, withholding periods, and safety directions on both the FARMALINX Stuka Flexi Herbicide label and the partner label.

Compatible Herbicides:

• Broadleaf Herbicides: Metosulam, clopyralid, MCPA amine, MCPA LVE, metsulfuron-methyl, fluroxypyr, 2,4-D amine.
• Grass Herbicides: Hoegrass (Annual Ryegrass only), Topik 240EC (Wild Oats and Phalaris only).
• Adjuvants: BS-1000, Uptake Spraying Oil (when mixed with Topik 240EC), WetDrop Wetter 1000.
• Insecticides: Lemat and Rogor.

APPLICATION METHODS

A. GROUND APPLICATION (BOOM)

• Apply with an accurately calibrated boom sprayer.
• Use at least 50 L/ha water for MCPA 750 and 200 L/ha water for 2,4-D Amine 625 in sugarcane.
• Adjust boom height to ensure a double overlap of the nozzle pattern.

B. AERIAL APPLICATION

• Apply in a minimum volume of 35 L/ha water for MCPA 750.
• Use accurately calibrated equipment delivering not less than 20 L water/ha for 2,4-D Amine 625.
• Apply with wind speed between 3 km/h and 15 km/h, air temperature above 30°C, and wind blowing away from susceptible crops.

C. HIGH VOLUME SPOT SPRAYING

• Apply using a calibrated handgun with specific nozzle plates and pressure settings.
• Thoroughly wet the weed to achieve optimal control.

D. LOW VOLUME HIGH CONCENTRATE APPLICATION TECHNIQUES

• Gas-powered gun: Apply shots for uniform coverage.
• Sprinkler Sprayer: Use micro sprinklers at low pressures for even coverage.

E. BLANKET WIPER APPLICATION

• Use a durable and wettable material with a rigid backing.
• Mount the blanket behind a motorized vehicle.
• Set the flow rate to keep the blanket wet but not dripping.
• Maintain ground speeds of 10-15 kph for ideal application.

CLEANING SPRAY EQUIPMENT

• Rinse the spray equipment thoroughly after using FARMALINX Stuka Flexi Herbicide.
• Decontaminate the equipment before spraying cotton and other sensitive crops.

RESISTANT WEEDS WARNING

• FARMALINX Stuka Flexi Herbicide is a Group I Herbicide, and resistance management strategies should be implemented to minimize the risk of resistance development.

RE-ENTRY PERIOD

• Do not enter treated areas until the spray has dried unless wearing appropriate protective clothing.

PROTECTION OF CROPS, NATIVE AND OTHER NON-TARGET PLANTS

• Specific guidelines are provided for protecting susceptible crops and plants.
• Pay attention to recropping periods and potential soil residues.
• Avoid spray drift onto nearby susceptible crops or plants.

DRIFT WARNING

• Avoid spraying under conditions that may cause drift onto nearby crops or lands.
• Use appropriate droplet sizes according to ASABE S572 standards.
• Decontaminate equipment before using it for other materials on susceptible plants.

Always refer to the product label for the most accurate and up-to-date information.