TomahawkPlant Protection Product ComparisonPlant Protection Product ComparisonReport inaccuraciesReport inaccuracies

Tomahawk Herbicide is for selective weed control in asparagus, barley, chickpeas, faba beans, lentils, lupins, oats, peas, pigeon peas, potatoes, soybeans, sugarcane, tomatoes, vetch, wheat and white lupins.

GENERAL INSTRUCTIONS
Tomahawk herbicide is non-corrosive to equipment, non-flammable and non-volatile. The degree of weed control and duration of effect will vary with the amount of Tomahawk applied, soil texture, rainfall and other conditions. For sugarcane: For recently introduced varieties DO NOT use Tomahawk unless it is ascertained that the variety to be treated shows sufficient tolerance to the treatment under local climatic conditions.

MIXING
Tomahawk herbicide is a dry flowable formulation to be mixed with water and applied as a spray. Before spraying calibrate equipment to determine the quantity of water necessary to uniformly cover the measured area to be treated. Partially fill the spray tank with water. Measure the amount of Tomahawk herbicide required for the area to be sprayed. Add the correct amount of Tomahawk herbicide to the spray tank with the agitation system engaged. Top up to the correct volume with water. THE MATERIAL MUST BE KEPT IN SUSPENSION AT ALL TIMES BY CONTINUOUS AGITATION. In tank mixes Tomahawk must be in suspension before adding the companion herbicide or liquid fertiliser.

APPLICATION
Best results are obtained if treatment is made to moist soil and moisture is supplied by rainfall or sprinkler irrigation (6-12mm) within 2 weeks after application.
If heavy rains occur soon after application, injury to the crop may result.

AERIAL APPLICATION - (QLD ONLY)
Peas - apply in a minimum of 20L water per hectare. Potatoes - apply in a minimum of 50L water per hectare. Avoid overlapping of spray swath. Avoid spraying in still conditions and in wind likely to cause drift