Tryclops 600
- Manufacturer
- PCT holdings
- Category
- Herbicides
- Registered until
- 2025-06-29
- Registration number
- 53111
- Active materials
- triclopyr600 g/l
- Links
- LabelView
GENERAL INSTRUCTIONS:
COMPATIBILITY - FALLOW SITUATIONS:
- Compatible Products: Tryclops® 600 is compatible with Lontrel Herbicide, Starane 200 Herbicide, Glyphosate 450 Herbicide, Glyphosate 490 Herbicide, Touchdown Broadacre, 2,4-D amine or 2,4-D ester, and Chlorpyrifos 500 Insecticide.
- Glyphosate 450 Tank Mixing: When tank mixing with Glyphosate 450 in fallow, refer to the Glyphosate 450 label for use rate and adjuvants. Avoid using Uptake Spraying Oil or D-C-Trate Crop Oil.
SORGHUM:
- Tryclops® 600 is compatible with Starane 200 Herbicide and atrazine (500 g/L flowable product only).
- Use nitrile gloves when tank mixing with products requiring PVC gloves.
MINIMUM RECROPPING PERIODS:
- Observe the specified recropping periods for Tryclops® 600:
- Wheat, barley, sorghum, maize: 7 days
- Chickpeas, soybeans, sunflowers: 7 days
- Cotton: 14 days
MIXING:
- Half-fill the spray unit with water, add Tryclops® 600, and complete filling with agitation. Add crop oils or wetters if necessary. Maintain agitation during spraying. Only mix enough for immediate use, avoiding storage.
APPLICATION:
-
WOODY WEED SITUATIONS:
- High Volume Spraying:
- Ensure thorough coverage of foliage and stems to the point of runoff.
- Hand Gun: Apply recommended mix for full coverage through a No. 6 to 8 tip.
- Knapsack: Use for smaller infestations.
- Aerial Application:
- Apply in 100 to 200 L water/ha with calibrated aircraft.
- Avoid spraying under windy or hot conditions.
- Controlled Droplet Application (C.D.A.):
- Use equipment like Micron Herbi for similar results to high volume spraying.
- Low Volume High Concentrate Application Techniques:
- Use gas-powered gun or sprinkler sprayer for good control.
- Basal Bark and Cut Stump Treatment:
- Mix Tryclops® 600 in diesel for basal bark and cut stump applications.
- High Volume Spraying:
-
CROPPING/FALLOW SITUATIONS:
- Boom Application:
- Apply in a minimum spray volume of 50 L/ha with flat fan nozzles.
- Aerial Application:
- Use a minimum spray volume of 35 L/ha with flat fan and CP nozzle configurations.
- Avoid drift onto desirable plants.
- Cleaning Spray Equipment:
- Rinse water-based equipment thoroughly. Use water and alkali detergent for decontamination.
- For diesel-based equipment, use water, degreaser, and alkali detergent for cleaning.
- Boom Application:
CLEANING SPRAY EQUIPMENT:
- Use water-based or diesel-based cleaning methods depending on the carrier. Thoroughly rinse, drain, and clean the spray unit, filters, hoses, and nozzles. Follow specific decontamination steps for different carriers.
Registered for cultures |
---|
Fallow |