Uni-Rane 200Plant Protection Product ComparisonPlant Protection Product ComparisonReport inaccuraciesReport inaccuracies

For the control of a wide range of broadleaf weeds in fallow, Lucerne, maize, millets, pastures, poppies, sorghum, sugar cane, sweetcorn and winter cereals.
Also for the control of woody weeds in agricultural non-crop areas, commercial and industrial areas, forests, pastures and rights-of-way, as specified in the Directions for Use.

DIRECTIONS FOR USE:
RESTRAINTS: DO NOT apply to plants which may be stressed (not actively growing) due to prolonged periods of extreme cold, moisture stress (waterlogged or drought affected), poor nutrition, presence of disease or previous herbicide treatment as reduced levels of control may result.
Thorough coverage of both foliage and stems, to the point of runoff, is essential for high volume applications (see GENERAL INSTRUCTIONS; application methods WOODY WEED SITUATIONS section).
DO NOT spray if rain is likely within one hour.

GENERAL INSTRUCTIONS:
MIXING
Uni-Rane may be mixed with water or diesel. Mix only sufficient chemical for each days’ use and avoid storing.
Mixing in water: Half fill the spray tank with water and add the required quantity of UniRane and complete filling. Agitate continuously to ensure thorough mixing before and during application.
Mixing in diesel: Half fill the spray tank with diesel and add the required quantity of UniRane. Add the remainder of the diesel and agitate or shake to mix contents.
Tank mixtures: Wettable powder or dry flowable formulations (e.g. water dispersible granules) should be added to the spray tank first, followed by suspension concentrates (Flowables), water soluble salts and then emulsifiable concentrate formulations (UniRane). Add spraying oils and surfactants (wetters) last.

OILS AND SURFACTANTS
Oils:
Where specified use Uptake Spraying Oil at the rate of 500 mL/100 L of spray mix. When using less than 100 L/ha spray volume, ensure a minimum of 250 mL/ha of Uptake Spraying Oil is used, unless 1 L/100 L or 1 L/ha is specified.

Surfactants (wetters):
LI 700 to be used at 300 mL/100 L. Spraymate Activator to be used at 125 mL/100 L. Use a 100% concentrate non-ionic surfactant such as Chemwet 1000 at 100 mL/100 L of spray mix where required.

COMPATIBILITY
Uni-Rane is compatible with the herbicides listed. Follow any regional restrictions, and all directions and restrictions on the label of any product mixed with Uni-Rane.
Atrazine 500, Metsulfuron Methyl 600, Flumetsulam 800, Metosulam 714, DiclofopMethyl 375, Triclopyr 600, Clopyralid 300, MCPA 500, Fenoxaprop-P-ethyl 120, Glyphosate 450, Clodinafop-Current 240 EC (see below), Picloram 2,4-D, MCPA 420 + Picloram 26, Glyphosate-trimesium 480, 2,4-D 625, 2,4-DB 500, 2,4-DB 400, Trifluralin 500, MCPA 500, Glyphosate 450, Glyphosate 540.