Wolverine AdvancedPlant Protection Product ComparisonPlant Protection Product ComparisonReport inaccuraciesReport inaccuracies

EPA # 0000264-01168-AA-0000000
States Registered: CO ID MN MT ND OR SD WA WI WY

DIRECTIONS FOR USE
It is a violation of Federal law to use this product in a manner inconsistent with its labeling.

USE INFORMATION
Wolverine Advanced Herbicide is designed for broad spectrum postemergence control of important grass and broadleaf weed species in wheat (including durum wheat) and barley.

APPLICATION TIMING
Wheat: Apply Wolverine Advanced Herbicide to the crop from emergence up to 60 days prior to harvest in the states of Minnesota, Montana, North Dakota, and South Dakota, 70 days prior to harvest in other states.
Barley: Apply Wolverine Advanced Herbicide to the crop from emergence up to the 5-leaf stage.

TANK MIX INSTRUCTIONS
Compatibility Testing With Tank Mix Partners
If Wolverine Advanced Herbicide is to be tank mixed with other pesticides, compatibility should be tested prior to mixing. To test for compatibility, use a small container and mix a small amount (0.5 to 1 qt) of spray, combining all ingredients in the same ratio as the anticipated use. If any indications of physical incompatibility develop, do not use this mixture for spraying. Indications of incompatibility usually will appear within 5-15 minutes after mixing. Read and follow the label of each tank-mix product used for precautionary statements, directions for use, geographic and other restrictions.
Tank mixtures For Insect Control
Wolverine Advanced Herbicide may be tank mixed with Baythroid® XL, Mustang Max™, or Warrior® insecticides providing proper timing for insect and weed control are the same.
Tank mixtures For Disease Control
Fungicides such as Stratego®, Tilt®, Headline®, mancozeb (Dithane F-45®; Manzate® 75DF; Penncozeb® 75DF), or Topsin® M may be tank mixed with Wolverine Advanced Herbicide when timing for application of each tank mix partner is the same for the use site. Do not apply Wolverine Advanced Herbicide in tank mixture with tebuconazole.
Tank mix applications of herbicides with fungicides may cause temporary yellowing, leaf burn and or height reduction of the crop. Refer to the specific fungicide label for use directions, application rates, restrictions and a list of diseases controlled.

MIXING INSTRUCTIONS
Wolverine Advanced Herbicide must be applied with clean and properly calibrated equipment. Prior to adding Wolverine Advanced Herbicide to the spray tank, ensure that the spray tank, filters and nozzles have been thoroughly cleaned. In-line strainers and nozzle screens should be 50 mesh or coarser.
1. Fill the spray tank 1/4 to 1/2 full with clean water then add AMS or UAN and begin agitation or bypass.
2. Add the appropriate rate of Wolverine Advanced Herbicide directly to the spray tank. Maintain sufficient agitation during  both
mixing and application.
3. Add a listed tank mix partner, if desired.
4. Add surfactant if desired.
5. Fill the spray tank with balance of water needed.
6. Continue agitation during Wolverine Advanced Herbicide application to ensure uniform spray coverage.

SPRAY DRIFT MANAGEMENT
Wolverine Advanced Herbicide is not volatile. Damage to sensitive crops can occur as a result of spray drift. Spray drift can be managed by several application factors and by spraying under the appropriate climatic conditions. Consequently, avoidance of spray drift is the responsibility of the applicator and grower.

WEED RESISTANCE
Wolverine Advanced Herbicide contains active ingredients which inhibit ACC-ase, photosynthesis and the HPPD enzyme systems. Wolverine Advanced Herbicide may be an effective tool in the management of broadleaf weed populations containing resistance to ALS, phenoxy or glyphosate herbicide modes of action. Repeated use of herbicides with the same mode of action allows resistant weeds to spread. To manage the spread of resistant weed populations, use herbicides with different modes of action in tankmixture, rotation, or in conjunction with alternate cultural practices.

RESTRICTIONS FOR USE
Do not apply more than 1.7 pt/A per season.
Do not make more than one application of Wolverine Advanced Herbicide per season.
Do not apply Wolverine Advanced Herbicide in tank mixture with tebuconazole.
Do not graze or harvest barley forage within 25 days, harvest barley grain and straw within 57 days after application.
Do not graze or harvest wheat forage within 25 days, harvest wheat grain and straw within 60 days after application in the states of Minnesota, Montana, North Dakota, and South Dakota, within 70 days after application in other states.

STORAGE AND DISPOSAL    
Do not contaminate water, food, or feed by storage, disposal or cleaning of equipment.
Pesticide storage
Store in original container away from feed and food. Store in cool, dry area. Do not store in direct sunlight. Do not allow prolonged storage in temperatures that exceed 105°F (40°C) or in temperatures that fall below 14°F (-10°C).

IMPORTANT: READ BEFORE USE
Read the entire Directions for Use, Conditions, Disclaimer of Warranties and Limitations of Liability before using this product. If terms are not acceptable, return the unopened product container at once.
By using this product, user or buyer accepts the following Conditions, Disclaimer of Warranties and Limitations of   Liability.
CONDITIONS: The directions for use of this product are believed to be adequate and must be followed carefully. However, it is impossible to eliminate all risks associated with the use of this product. Crop injury, ineffectiveness or other unintended consequences may result because of such factors as weather conditions, presence of other materials, or the manner of use or application, all of which are beyond the control of Bayer CropScience. All such risks shall be assumed by the user or  buyer.